Custom Made Chambers

Custom Made Chambers

Translate

Showing posts with label big. Show all posts
Showing posts with label big. Show all posts

Monday, September 17, 2018

Your Chamber is NOT too big

Your chamber is not too big. I always manufacture chambers with room for growth. And as long as the measurements you provided us were accurate your chamber is not the issue. Trouble shooting the problem you're having has a two-fold answer.

#1 - Your sleeve may be too tight, to test to see if that's the issue, wear a two inch portion of your sleeve at the base of your penis for an hour without the chamber. If your penis gets cold, then the sleeve is too tight and you can either stretch your sleeve up over a larger object for 24 hours to stretch it bigger, or you can purchase a larger 1" sleeve.

#2 - You could be using too much vacuum pressure. If you're using any more than 10 Hg's then that's too much. In fact with as little weight as you are using you should be able to use a little as 5 Hg's of pressure. Furthermore it's fine that a little bit of the sleeve gets sucked forward into the mouth of the chamber. That's actually a good indicator that your sleeve and penis skin have a good vacuum seal.

The fact that you took two months off doesn't help with the issues you're experiencing. During the layoff you lost all the tissue conditioning you had achieved. During the conditioning process (which can take several weeks) your penis will start to respond to the traction by expanding during the hang session. Ideally over the course of about 3 months you should start to experience expansion to the point where your penis packs the chamber completely. This doesn't happen in a couple weeks. It's a transitional experience that takes place with consistent, dedicated training.

I believe if you do a sufficient warm up - take a warm or hot shower prior to your hang session, do some moderate jelqs to loosen your flaccid penis and pull some blood into it so that you are at your fullest flaccid state... even slightly erect at about 30-50% this will help your penis circulation. Once you install your chamber you can help the expansion and circulation by priming your chamber 6-8 times. You do this by drawing out 10 - 15 Hg's of pressure, holding it for 5 seconds and releasing the pressure. Repeat this 6-8 times and then on the last prime go up to 10 Hg's and allow your penis some time to expand before you hook up any weight. About 5 minutes should be enough. Then release the pressure, and go up to 5 Hg's of fresh vacuum pressure, disconnect the hose and attach your 3 lbs of weight and do your hang session. Remember to do your 5-10 minutes of aggressive hand stretches / jelqs immediately after your hang session in order to take full advantage of the fatigue you have induced from the hang. Wear a Girth Band at the base of your penis to prevent retraction and keep your flaccid penis full and long.

Tuesday, May 15, 2018

VIDEO TUTORIAL: Mini Jelq




1. Massage your penis until it reaches 60-80% erection.
2. Use your right hand to grab base of your penis.
3. Use your left hand and make an "OK" sign with your thumb and index finger and grip tightly around the your penis behind the right hand.
4. Starting from there, slowly pull (milk) towards the penis head.
5. When you reach the penis head, let go with your left hand and start all over again.
6. Perform the exercise for 5 minutes (100 strokes)

Friday, January 5, 2018

FATIGUE: What does it mean to Reach Fatigue in Penis Enlargement

"Fatigue" doesn't always accompany soreness. It's more of a state of condition than a feel. Although you can have symptoms of soreness, but that depends on the level of your training, and the plateaus that you reach.

If you base everything on the feel you get from ligament soreness then you have not properly defined "fatigue". Obviously as you progress into heavier more intense training you can feel the following symptoms......

#1 - Soreness at the base of your penis, since your ligament is attached to your pubic bone you should feel it more internally behind the fat pad.

#2 - Mild tenderness within your penis shaft. I wouldn't classify this as soreness, but more like muscle or tissue awareness. Meaning if you massage or squeeze your penis you should feel like it's been used or worked.

#3 - Soreness in you sphincter muscle. Occasionally as you graduate to heavier weight the initial sessions can manifest a soreness in your sphincter muscle. This means your body is reacting to the stress of the workload and tensing up. This is where you really need to learn to relax that pelvic floor muscle, and feel that stretch to it's fullest.

#4 - A very loose and pliable flaccid penis. This is the condition you should experience after a good hang session. It's also the time to take full advantage of this "fatigue" and do 10 - 15 minutes of very aggressive hand stretches. The hang work is what facilitates the "fatigue" and it's where you'll be able to stretch, twist and bend your penis beyond what you can normally do prior to a weight hanging session. It's in this condition that you probably wouldn't be able to achieve a 100% hard erection. This is FATIGUE!

It's my experienced that erect length gains come from flaccid length gains. Your penis can be stretched to greater lengths while flaccid than while erect.
You'll never hear anyone say that they have a 7" flaccid penis, but only a 6" erection. Over time the difference between your flaccid length and erect length will become less. For me if I had to put a percentage on it, it would be approximately 30%

If you are looking to target the ligament stretch more intensely without going to heavier weight, then use a Fulcrum bar as close to the base area as possible, all the way up to the point where you have to push your testicles backwards. Only do not exceed 15 minutes of Fulcrum hanging, as it will cut off circulation to a point. You can do sets of Fulcrums in between SD hanging.

Thursday, December 21, 2017

VIDEO TUTORIAL: Bundle Exercise demo by KINGSNAKE




This exercise is especially for more experienced users that need something extra to maximize their results. But you can use it even if you are a beginner since it is pretty simple and your penis does not have to be erect. On the contrary, for this exercise to work your penis must be in a completely flaccid state.

Many of you might be wondering what the difference is between the bundled stretch and the simple stretch. The bundled stretch helps you gain some extra inches when simple stretching has brought you its maximum gains. It is the next step in penile enlargement exercises as it helps you stretch the tunica both in length and girth and increases the overall mass of your penis.

The actual exercise is pretty simple and includes three steps.

Step one, twist your penis towards one direction as many rotations as possible. Think of your penis as a washcloth that you are trying to squeeze the water out of.

Step two, when you have reached the desirable amount of rotations (always make sure you are not hurting yourselves), stretch it without releasing the rotations.

Step three, put the other hand on the base of the shaft and push towards the opposite direction as if your hands are trying to go away from each other.

Hold for 30 seconds and release. Now, repeat but stretch towards a different direction, do as many repetitions as possible.

There is not a certain number of rotation that you need to do, that is entirely up to you and your physiology. Do as many as possible without inflicting pain.



VIDEO TUTORIAL: Kingsnake Demos LG Hanger System





Thursday, December 14, 2017

TUTORIAL: Replacing the sleeve on your LG Hanger Chamber

Relace Sleeve on Chamber from Americus on Vimeo.

This video shows how to handle your silicon sleeves when replacing them on your custom made LG Hanger chamber for penis enlargement.