VIDEO TUTORIAL: Detaching & Cooling Down TOTAL MAN

HOW TO DETACH FROM YOUR LGH & FINAL COOL DOWN

CLICK BELOW FOR VIDEO

-->CLICK HERE FOR LGH SYSTEM<--

In this video, I'll be taking you through how to detach the LG Hanger. Yes, that's right. A pure video just to explain how to detach the LG Hanger because it honestly deserves its own video.

Now, as much as the LG Hanger may seem like a more tedious process to go through for a hanging experience, it is honestly one of the most effective and safest ways to hang, not to mention see results in the long term. I personally actually use the LG Hanger in every single one of my routines, so I'm definitely a true advocate for this penis enlargement device, especially for length. But, it has also honestly seen me through some girth gains as well.

So, detaching actually deserves it's own video all together and here's why. So again, even though it's a more tedious process, one, I'm a solid advocate and truly believe in the LG Hanger, but two, it makes for a safer and more effective experience. Now, why I say that guys is because you might be thinking, wow, that's really tedious if he's making a whole video on just detaching the thing. But, please believe me when I do say this, it is so worth it.

All right guys, detaching. Pretty much the opposite of what I went through with you, where the attaching and even progressive hanging, is we do want to accommodate for that fluctuation in pressure, which is now going to be released. All right, so if you're at your maximum weight and you haven't necessarily dropped down any weight, but you're done hanging or you've run out of time, then you really need to make sure that we're holding onto the chamber, keeping that pressure in there. No, I'm going to do is hold the chamber down, take the carabiner or the weight off. You don't necessarily need to drop weight because if you do need to detach now, this is the way to do it. All right, so all I'm going to do. You won't actually be able to see what I'm doing, but I can just talk you through it. All I'm doing is slowly releasing the pressure.

So, if I could have a pressure scale from 10 down to one, and one being I can literally just let him dangle there without actually holding onto the chamber. For instance, I'm going to be at ten, nine, eight, seven, slowly backing off that pressure, five, four, three, two, one. All right, so not too much fluctuation there, and the glans feel completely fine. All right, guys, so once your weight is actually off, time to detach the LG Hanger.

Now, the way that I've found that works pretty much every time, not only with releasing the pressure... I used to actually use the pump to release the pressure, however I actually found this a lot more comfortable and a lot more effective. All I'm going to do is actually get a bit of stretch happening with the sleeve. But, as long as you do it nice and close to the chamber. Now, what I'm doing is getting about three fingers underneath the chamber and all I'm going to do is roll toward the chamber. I'm going to pull one side all the way up, I'm going to pull the other side all the way up, and I'm just going to continue to actually push the slave up toward the top of the chamber. As I continually slide, you notice that I'm pretty free to come out. All I'm going to do is push down on one side of my glans, and I can nice and easily slip on out. Just take your time with this, don't force it, and you'll come out nice and smooth. Nice and easy, guys.

Now, the next thing is obviously cooling down for one, but two is obviously removing the tape. Now guys, as helpful as this is, one of my initial or first experiences with the tape was an absolute traumatic one. If you can imagine how much pressure has now been built up inside the glans and the shaft, especially where the tape is attached to the penis, which is a little bit on the shelf, but mostly on the tip of the glans. And you could only imagine how much the skin can now be sensitive because of all that pressure from your hang, or any of your routine to do with the LG Hanger.

So, what we need to be careful of is actually taking the tape off. I experienced this firsthand that because the skin is so sensitive, one of the times I took the tape off was the worst way possible. I literally just started slowly peeling it off and I thought that was the right way. Lo and behold, it actually told my skin. There was blood everywhere, so I'm recommending... I literally gave up tape altogether, except you will have no success or no progress with your LG Hanger or any vacuum-based device for that matter. So, the best way to get this tape off... Now, it's a bit of a combo of a cool down plus a fantastic way to get the tape off is just some warm water.

All right, now you can even put some soap with no nasties in it in the water. The soap is actually going to act to break down the adhesive on the tape from the inside, but even warm water is totally going to be fine, guys. So, all I'm going to do is pretty much pop him in nice, warm water, make sure it's not too hot, and I'm going to hold him there for about 30 seconds. Now, once you 30 seconds is up, all I'm going to do is pretty much just rub on the tape pretty much everywhere. So, the water's going to slowly make its way into the tissue and the material of the tape. Now, what I'm going to do is actually go for a little bit of a cool down. I'll actually finish up with a bit of a jelq, massaging all the tissues that have now been stretched and deformed and actually stressed.

So, we want to essentially just tell the penis everything's all right and we're just going to cool down by more or less massaging. All right, so it's like a jelq, except there's no way that I'm going to full intensity. So, this is really light, just massaging it out. And what this is also going to do is build up a little bit of pressure to help that adhesive breakdown and to actually come off the glans. So, I might even go for maybe 20 to 30 quick jelqs, chuck him back in for another maybe 30 seconds, get him out, same process again, rub the water in pretty much from top to bottom. Jelq it out a few more. Again, this jelq is going to continuously build the pressure up in the head, and actually help to get the actual adhesive to come off the glans. Now, I'm getting quite a bit of success there, so I'm going to try to get it off. I can feel it's really loose. It's hardly even sticking to my glans anymore.

It's just going to come off nice and easy. Again, just keeping everything really close. Now, if at any point, guys, it feels that it's starting to grab, as you can see here it's a little bit of grab. It feels like it's too much, simply get the water, go back in again, repeat the processes we just did. Otherwise, you can keep peeling it off. Go nice and slow all around. Now, even after that you can still finish off with a little bit more of a jelq, and you're good. I'd love to know if this video helped, guys. If it did, let me know in the comments. If it didn't, still let me know. If you have any questions, let me know in the comments, and I'll do my best to get back to you as soon as possible.

And if you have any other ways or methods to actually detach the LG Hanger, please leave a comment below as well. Because you never know how far your comment is going to go to be able to change somebody else's life and help someone else out as well. Plus you never know, with a question, you might even be able to help us answer someone else's question that they didn't even ask yet. So, get involved and we'll honestly all love you for it forever. I really hope you enjoyed the video, guys. I'll see you in the next one.