VIDEO: Cable Weight Stand Assembly Tutorial

How to Assemble Your Cable Weight Stand

-->CLICK HERE TO PURCHASE CABLE WEIGHT STAND<--

- All right hey everyone. We are gonna be going through the assembly of the cable weight stand or the roller stand. 

So we're gonna start at the bottom with the support feet, the bars here. All right, so first thing is you're gonna wanna take this and put it through the hole here. The hole at the very bottom and there's a hole on the other side. Just make sure it fits through, and what you'll want to do is make sure that the hole in here is pointing downwards so that screw can go into it, so you can adjust it with both fingers or you can use your finger in the middle to adjust it. 

All right once you got that in the right spot you'll then take your bolt here, and you'll put it through the smaller end on here not the larger side. So small end first, and then holding it one finger, and holding this with two you can use your eyes to make sure that it fits into the hole, and then you can apply pressure and tighten with your hand to start, once you feel that it has a nice grip, you can use your hex tool, it's a 5 mm hex tool to finish up with the tightening. And that's it, now it's all together, and you're just gonna repeat the same with the other side. 

Okay, we're gonna be going to the top of the assembly, so in order to get these two holes going, we gotta have washers on the outside and the inside, on the inside here. So, what I would suggest is getting your bolt, putting a washer on it, putting it slightly through, enough so where a washer can hang on to the bolt, and then once you have that on, you can go ahead and put this in just a little bit enough so that it can go through the hole. Push it through. You don't want to push it all the way through, 'cause we still need a washer on the other side, and I like to adjust this, and kinda move this out of the way a little bit, so that the bolt is kinda hanging out there a little bit. 

All right, and then you can kind of slip this washer kinda in there, you gotta squeeze it in. Make sure you have your finger on this other side so the bolt doesn't push out, and then you kinda squeeze it so it fits through the hole. Now you put your last washer on, all right and then you put nut on. I just probably would do this about hand tight for now, and then once you're know that everything is good you can come back, use your adjustable wrench and your hex tool to tighten everything up. 

Okay, now we're gonna be putting the other arm together, and also assembling the adjustable knob. So what you'll do, there a pin, kind of a metal tab that is, that this is going to push on. So you wanna make sure that that is following this side that this is going into. 

All right so you just slide it in make sure it's in fully, nice and tight, and your gonna take this and just simply screw it in. Just like that. I can adjust, Now it won't move, see? All right, that's it for that part. All right now for the last part, the roller stand itself. So you're gonna want to attach this to the open end here, not the back with the two holes. All right so you're gonna take the two holes here, place it on and you put your bolt through the hole so it comes out on the other side. Now, just take your washer, keep your finger on the other side, you can turn it over if you need to, and then attach the bolts. I'll just hand tighten it for now. 

All right, and then we're going to repeat the other bolt put it in, sure it fits through the other side and hold and then you can attach the other nut. Again just hand tight is good for now. Okay So once that is all good, then you can come back with your hex tool and adjustable wrench to tighten these together, and that's it. All right guys, hope that helped.

VIDEO REVIEW: Cable Weight Stand Set Up

CLICK HERE FOR CABLE WEIGHT STAND

You simply install your LG Hanger onto your penis, find a chair you can comfortably sit in, and position it in such a way that when you are seated you can rest your feet on the base leg (see photos). Once you determine where you want to position stand (this is all dependent on the height of the chair you are sitting in and how tall you are). Then hook your weight onto the cable with the cable clamp, pull the cable up over the roller ring with the groove in it. Holding onto the opposite end of the cable with your hand, sit down and then attach the end of the cable with your double end hook that came in your package to the end of our LG Hanger. You might have to adjust the cable clamp so that the weight doesn't hit the floor.

The exercises that you can do are by changing the angle of pull by raising or lowering the height of the roller. You do this by loosening the red lock handle and lowering or raising the roller. You can also do a "bundle twist" by turning the cable left or right to put a half or full twist onto your penis while you are hanging.

VIDEO REVIEW- RMan Demo Review of Cable Weight Stand (CWS)

CLICK HERE FOR CABLE WEIGHT STAND

Hello gentlemen. This is Rman, coming to you live from Las Vegas Nevada. Demonstrating the roller stand from LG Hanger.
It is quite comfortable. I put some weights on the backside cause I don’t want the stand to roll, just as a precaution for myself, and I’m sitting here watching Formula One practice this Friday evening 841 West Coast time.
I can sit in the position for hours if I choose to. This is very quite comfortable. I’ve used other hanger positions or other hanger products before, didn’t like them, got with LG, made me feel very comfortable, took the measurements, sent it back to them, and they sent it to me.
like They said m, 7 to 10 days business days, got the product and love the product and using it working very well my goal is to go to 10 inches 7 1/4 and so I will be pursuing that and I use the LG Hanger plus a bath mate and I do the jelqing.
 I do all the exercises you know I follow Kingsnake that guy he’s amazing he’s done a lot in the last couple years and not trying to compete with the brother cause he’s already got me beat by 3 inches but I’m trying to make my own goals satisfy my own wants so this is Rman coming to you live from Las Vegas using the LG Hanger Roller Stand, signing off,
you guys need to get with this take care

VIDEO REVIEW: Dan Salas Hangs a Bowling Ball & Boat Anchor

CLICK HERE FOR LG HANGER SYSTEM

Dan Salas hangs both a bowling ball and a boat anchor to test the quality and durability of the LG Hanger Penis Enlargement Weight Hanging System. He gives his review in the video Tutorial below.

ARTICLE: ALTERNATIVE Taping Method

-->CLICK HERE FOR LG HANGER SYSTEM<--

ALTERNATIVE TAPING METHOD
This method can be used by either circumcised or uncircumcised men.
Step 1) Wrap one piece of tape around the circumference just below the glands.
 Step 2) Wrap a second piece of tape just above it as shown below.

 Step 3) Wrap a third piece perpendicular, just left of the center as shown.

 Step 4) Wrap a fourth piece beside it.

 Step 5) Wrap a fifth piece around the shaft to secure the top two pieces.
 Step 6) Squeeze and mold the tape to the shape of your penis.

 Step 7) Install chamber.

VIDEO TUTORIAL: Alternative Wrapping Method

ALTERNATIVE WRAPPING METHOD

-->CLICK BELOW FOR VIDEO<--

-->CLICK HERE FOR LGH WEIGHT SYSTEM<--

- - All right. Hey, guys, I am here to show you the alternative wrapping instruction method using white foam tape. Looks like this, sticky on one side and not on the other. So to get started, you know, make sure you have your girth band on to keep a little hard, while you're goin' through all this, makes things a little bit easier. So maybe just about 50, 60% erect. Nothin' too crazy. Right, so you're gonna take you first kinda longer piece of tape, and you're gonna wrap it just on the glans, just covering a little bit of it, and you're gonna wrap it on the circumference, goin' on all the way around, just like so, okay. Squeeze it all a little bit. And you're gonna take another longer piece and you're gonna go a little bit more above the glans, or onto the glans I should say, and again you're gonna wrap it all the way around like so. Just a little bit more, and you start squeezin' it down a little bit to get it really nice and secure. And then you're gonna take a shorter piece of tape and you're wrap it going downwards on one half of the tip like that, and then you're gonna take another shorter piece of tape, and again, wrap downwards to cover the top. Right, and you can start kinda squeezin' stuff down here now, gonna get it molded in. All right. And then to kind of secure everything together, these two pieces that we just put on, we're gonna put one more long piece that covers that, and again we're gonna go all the way around to make sure everything is nice and secure. So once you got that taped in. You just go ahead and squeeze, mold it all together. Make sure everything is nice and secure. And once it's lookin' good, you're ready to go.

VIDEO TUTORIAL: Circumcised Men Wrapping Method

-->CLICK HERE FOR LG HANGER SYSTEM<--

DiscoStick Demo Wrap Prep Blue Tape

Hey everyone this is just a quick wrapping video per the LG manual. So first thing is you'll want to make sure you have your girth band on, I like to double mine up to keep the pressure. And then you'll take your tape, and you'll start about an inch below, you'll make your way around, make sure it's all nice and smooth. I'm gonna wrap up towards the top having a little bit hang off. And just kinda squeeze it together at the end there. Squeeze it, and then fold it under, so it all sticks together, so you might wanna hold that for a little bit. Hold down here, kinda squeeze everything in. You don't wanna squeeze too tight, just enough for everything to stick.

Just keep on holding. So it seems pretty good. Let's just wrap down, and you can hold that if it's not staying, and then put that in your hanger, and fold down the silicone. And you are ready to go.

So I hope that helps some of the technique as far as hanging with an LG hanger, and your wrap technique. I am circumcised obviously so, you'll want to check the manual for the uncircumcised option.

DiscoStick Demo Wrap Prep Beige Tape (personal preference)

- Alright, so the first thing you wanna do is get about 80 to 90% hard. I do this with the two girth bands and I'll show you how those come into play in just a second. And then we're gonna go ahead and do a wrap, just about half an inch below the glans. Just make sure it's nice and tight. Wrap it all around. Nice little opening there. And then we'll just hold this down, just try to get a full grip if possible, then just kinda squeeze and squeeze 'em together. That helps tighten it up. Make sure it's nice and secure. Not too tight, don't wanna hurt yourself. 

Alright, so we still got that little opening, so I have this band here. Another piece, and just wrap it across like so. Then you hold that in place, make sure everything stuck together. Give it just kind of a pulsing motion to keep it all good. That should be okay. Looks like everything's good. Still need to put our LG Hanger on there to get it wrapped up. Now, I just gotta pull down and just kinda slide it all the way across. Okay, pull out any kinks. Then we're gonna roll this back. 

Make sure it's nice and tight. Check the inside, everything looks good. Still together. Then we're gonna pull this first band up by the head and then we're gonna pull the bottom one around at the bottom, and that gives me a pretty nice tight fit for my hangs. Serves me well so far. So now, we're ready to pump and we're ready to hang. Hope you enjoyed.