VIDEO TUTORIAL: LGH Extender Demo by TotalMan

Click Below for the LGH Extender Demo PART ONE

Click Below for the LGH Extender Demo PART TWO

-->CLICK HERE FOR LGH EXTENDER<--

In this video, guys, I'll be taking you through how to not only set up the LG Hanger to the new rod system while at the time of this video, how to actually set up the bar that it comes with on the rod system, on to the LG Hanger, super simple. And then, I'll actually show you how to attach, in my opinion, the best way possible.

Now I won't be going into too much depth on actually how to attach the actual chamber itself. This video is mainly to cover how the rod system is not only going to be hooked up from the top bar onto the chamber, how to actually attach once you're in the rod system, but also how to adjust the system as well.

So first things first, you're most likely going to need maybe some pair of pliers, or even a shifter of some sort to fit on that head just there.

So what we're going to do is loosen off that nut nice and simple. As you can see, it comes off nice and easy, undo and undo the last long one. As you can see, it's precisely been machined in there. We're going to take that top bar off so you can chuck it on nice and easy, . pull down the springs, so you can detach that, or you can literally just undo the nuts and it will free up the springs a lot more.

What you're going to do is pretty much position this straight on the top of your LG Hanger chamber, place it through the hole, and screwing it back in just as if you were screwing the ice screw in. I just realized, I said  screw before, but it is an eye screw.

So once it's actually in your chamber, go ahead and tighten up that nut. Make sure it's nice and tight. Not too tight, it's actually not going to go anywhere. It's just so that this actually doesn't spin around at all.

Now all you have to do is attach the chamber and I'll show you the rest.

Okay, guys, for the sake of this tutorial, I won't be going into too much depth about the LG Hanger chamber itself. However, I do want to give you a couple more tips on the way that this may attach, and another method that I actually found, which I almost was trying to avoid, but it seems to actually work for me in my personal opinion, a little bit better and a little bit easier.

Now, all I do is literally get a little bit of coconut oil, like tiny, you almost can't even see that. And, what I'm going to do is put it on the outside of the chamber, all the way down the sleeve. And I'm actually going to not roll, but slide the sleeve up. You'll see how easy it comes up.

So now I've got a real slippery surface on the underside of the sleeve, technically the outside when it's going to slide down, and now I'm faced with the inside of the sleeve and the inside of the chamber.

Now as always, I like to get a little bit of tissue just to put it on the bottom, to save from any of the taping damp or getting moisture just from, I guess the heat of your penis. Plus guys, we're actually pulling on the urethra and the other end of the urethra is obviously the bladder. So the chances of actually pulling through fluids is kind of high, so that's why I always advise you to chuck in a little bit of tissue down the bottom.

Now I'm not going to take you through the taping method. If you want to see how to tape, do go to the ultimate taping guide, or the LG Hanger attaching video, or the taping guide for the LG Hanger.

Now, my next recommendation guys, before you actually put the chamber on, it does get a little bit fiddly, but you do have to put the extender or the rod system on first, purely for the fact that the chamber won't actually fit through the pelvis ring.

Now you might ask, well, why don't they make the pelvis ring a little bigger? Because you actually want this to be a nice close circumference to the size of your penis as well, so that comfort is going to be delivered in the pelvic ring.

Now another recommendation I would give you is possibly get a little bit of sleeve just for some extra comfort, and, all I do with that is place it on the pelvis ring. So you've not only got this soft bit of plastic on the pelvis, and it is a nice size as well, but just to add a little bit of extra comfort, all I'm going to do is place this over the pelvic ring and over the rods a little bit.

Now what it's going to look like is a little opening that you can easily slide through. Even though that looks nice and small, it is just silicon, so that's going to be the inside of the pelvis ring. Just adds that little bit of extra layer of fat, extra comfort and feels really good.

Not to mention guys, what I'm also going to recommend is once you've got the tape on, not before, don't touch any oil before you go for the tape. You want this tape to be as adhesive as possible, to make sure you get the maximum protection out of your tape. So once your tape is on securely, I'd advise chucking some oil on, just on the mid shaft all the way up to the tape, but try not to actually get the tape. As I'm putting the oil on, I'm actually going to go all the way up the pelvis. So you're literally lubricating literally everything.

Now the reason being is, if you do try to move with that pelvic ring, and you've got high amounts of tension and dry skin is either on a dry pelvic ring or dry silicon, well it's not going to be too comfortable, because you're just going to get your skin gripping, and you really just want the skin to be able to slide freely. And the only thing that's going to have the tension is the inside tissues of the penis. Now that's what we want.

So once there, once all lubricated up, you're going to pop on through. Again guys, you don't need the sleeve, but you'll literally just be putting your penis right through the ring as I'm doing here. Now just to make sure that the pelvis ring is sitting right up, I'm actually going to try pull through as much skin as I can. So by the time I am on full tension, that tension isn't necessarily pulling on the skin, it's actually pulling on the internal tissues.

So I'm just going to pull through as much skin as I can, even give it a wiggle, shake up and down. Now once that's set, the silicon actually helps to actually keep the pelvis ring there while you're grabbing and moving around. Notice I can actually shake and everything, and it's not sliding down. Because it is a little bit fiddly, especially when you're standing up like I am, you may want to slide down, so this really helps it.

Now the next step guys is grabbing the LG Hanger chamber. I do actually like to get the remnants or the leftover of oil, so my hands are a little bit oily, and all I'm going to do is just escape on the inside of the chamber. And this is only going to work if the chamber is 100% clean, so make sure to you clean your chamber every single time. And you'll see that I could literally just on in, all I do is give it a few twists around, and I'm pretty much all the way at the end using your vacuum hose and trigger.

Now my preferred pressure is lately around about 15 to start with. If you get your glans right to the end, now the only trouble with having that sleeve slide all the way up, is, obviously it's going to cover the clear acrylic, and the actually see where your glans are. Now as long as your glans are right at the end, you're all good. Now all I like to do is just push down a tad. If I see that it's all there, pump up to 15, all good, I'm going to pull my skin back and simply slide down the sleeve.

Now that oil on the inside, or should I say outside of the sleeve on the chamber, is literally just going to slide down like you've just seen. It's a real, real simple. That pressure still on 15. Now the pressure guys is really dependent on personal preference. Not to mention where you're up to in your penis enlargement journey, especially with any vacuum based devices like the LG Hanger chamber.

But once you're there and you're comfortable, you're all good, you can even have a few warm ups if you want, so stretching out, stretching left.

Now I would advise just staying where you need the springs first. If you even just want to line it up, just say, for instance, if I push the rod system all the way back onto my pelvis, and the springs, well they're going to be pretty loaded by the time I pull those springs backs. So what I'm going to do is under these nuts, get them closer toward the bottom. Just make sure that it's nice and even on both sides. Pull those springs down.

Now what you're going to do ... Now, it's as simple as this guys, all you're going to do is pull the spring down, clip it in, because what you'll find is at the bottom of this little frame at the top that bolts onto the LG Hanger chamber, there's little grooves on the inside of that little frame here. So what I'm going to do is push the spring down, the spring's going to go within the frame, and now I've got pretty adequate tension as it is, which I can just stay there.

Now without actually tightening up these top nuts, you'll find that when you do apply attention, the system's going to want to twist either way. To actually prevent that, what we're going to do is close up these nuts. As you start going down with the top nuts, you'll find that the springs compress, and this actually gives the system a nice lot of rigidity.

So we're good. Now, if I wanted to apply a bit more attention, please note this guys, because I had to find out the hard way. I tried to tighten up the system by just screwing these bottom nuts. Now you can do that, just be wary about how much the springs are actually shortening and coming closer together.

What you want to do is, most likely under the top nuts first, you want to get some gap so that the frame attached to the LG Hanger a chamber isn't actually touching the nuts, okay? So notice how there's a bit of gap. Now what I'm going to do is actually start tightening the bottom two nuts, and I'll actually feel pressure start to pick up.

So almost see it like this. The bottom nuts or thumb nuts are literally for a tension and intensity, and then the top nuts are literally for the rigidity of the device so that it doesn't sway or feel really loose.

Now the way that I like to travel through my routine is, under the top nuts tighten up to a tension that feels adequate for my session, especially when you just start out guys. I would recommend really starting out slow. You want to get to that happy tension. And what I mean by happy tension guys, is, you'll be able to go down, go up, and it's still comfortable, all right? There's not too much pressure.

Now with any vacuum based device guys, you literally want to up the intensity nice and slow, because the glans need time to accommodate. So this is the fantastic thing about the extender. Let's say compared to hanging. If you were to hang, you'd be taking the weights off, putting them back on again, adjusting and trying to incrementally increase the weight, while trying to hold onto the chamber, so you don't lose that accommodation of pressure that the glans have just gone through.

So I like to pretty much get to a tension that I'm comfortable, that I can literally put the device up, down and move it around anywhere I like, and pretty much stand up or even sit down. Now what I'm going to do is meet where the frame is with the top nuts, and now I'm going to wind up and build some tension on the springs, maybe even just half a centimeter. So you'll notice that these are closing up, about half a centimeter, match it on the other side.

Fantastic thing about this device guys is that you can easily see where you're at in terms of movement. You can even set these top rods as kind of like a goal where you want to achieve maybe in the next six months or so.

So, while I've actually adjusted these bottom nuts, now, as I get through my workout or session, as I feel like my glans become accommodated to the pressure within the chamber, all I'm going to do is literally unscrew one, two half turns to make a whole turn. I can feel that pressure increase just a little bit, and then I'll leave it there for maybe another five minutes.

As soon as I feel like my glans are okay and I feel like I can actually go up in intensity again, a full rotation of the nuts, comfortable, good. And I can pretty much keep doing this until my glans either feel uncomfortable, or, I think that I'm at an adequate amount of tension where I can get to a good level of fatigue.

Now detaching guys is as simple as undoing those bottom nuts, due to a point where it feels like the springs are nice and loose and it's always coming off that top frame. And then all I like to do is literally just pull down one side, unclip, pull down the other side of the spring and unclip. And then all you're going to be left with is the chamber, which you simply remove and slide the extender off.

All the best guys. Any questions, let me know. I'll see you in the next video.

VIDEO TUTORIAL: CLAMPING Demo Total Man

CLICK BELOW FOR VIDEO

-->CLICK HERE FOR CLAMPS<--

-->CLICK HERE FOR GIRTH BANDS .875"<--

-->CLICK HERE FOR GIRTH BANDS 1.0"<--

-->CLICK HERE FOR GIRTH BANDS 1.125"<--

-->CLICK HERE FOR GIRTH BANDS 1.25"<--

CLICK HERE FOR SIZING GUIDE

In this video I'll be taking you through how to clamp. Plus I'll also take you through a few variations of exercises while doing the clamp. Now the client is an amazing way that could just about replace a penis pump and it even has less side effects of unwanted swelling around the glands and the loose skin even if you are uncircumcised. Now clamping does have its drawbacks including limiting blood flow that could potentially be dangerous which is why my one rule of thumb is always check, listen to your penis, and take it off to restore blood flow.

It doesn't mean that you're going to lose out on any benefits. It essentially means you're getting new, fresh blood into the penis. Plus you can also go back to some stretches, some clampless jelqs or other exercises to continually stress the penis in a good way and then you can chuck it back on. So think of it like interval training with sets of clamping. So, I'll get into the basic clamp and I'll also get into different variations of exercises that you can do successfully and effectively but hopefully safely with the clamp. Let's jump into it.

All right guys. To start off with your clamps I definitely advise getting the LG Hanger girth band or some kind of sleeve just to protect the skin as you place the clamp on. So first things first we're actually going to get ourselves to at least 80% erect. I'm going to place the girth band over. Now this is also going to assist you to keep that erection even in between the sets as you take the clamp off. Now that is obviously going to be necessary. Like I mentioned guys try to think of this as like intervals because you will be limiting the blood flow so much that you'll need to bring it back again or bring your penis essentially back to life to make sure that you're not doing any damage.

So once you've got the LG Hanger girth band right to the base or any kind of sleeve we're just going to get the clamp ready, going to open it up. Now it's essentially just going to go on as simple as this guys. Now what I'd like to do is just get it ready not completely closed so you're still allowing blood to come in, even perform a few jugs. Now as you get to just about a hundred percent guys, I'm probably pretty close to 100% there. What I'm going to do is close off the clamp and you will notice I get a tremendous amount of pressure build up. So I'm on the last clamp there and that's essentially going to help me stay quite erect.

Now it's obviously going to limit the amount, I've got maybe about another centimeter or two back here. So try to get the clamp and the sleeve as far back as you possibly can. Now from here guys you can either leave it if you feel like there is a moderate amount of pressure or enough to actually cause that stress for not only girth but even length gains. Then you could even just set the timer, for what I'd recommend always five minutes. It does not take long at all guys to quickly take it off, restore that that blood flow with a few jugs and then hit it back up again by clamping back on.

Now from here guys if you don't think the pressure is enough, if you're not necessarily feeling it too much and you think that it is safe because of your conditioning and experience with clamping or even this kind of pressure intensity then you could even go into a Uli . So these are the different variations I'll go through guys. So you've got the Uli so you can even add a bit more pressure to the bottom. As soon as you apply that forefinger and thumb that is obviously going to apply a lot more pressure throughout the rest of the penis but especially the glands as well. Now this is where the two handed Uli comes in really well so you can even take that fore finger and thumb off, apply the pressure first so that the pressure actually goes back down to the shaft and stops right at where the clamp is.

Now you've got all this pressure building up throughout the middle of the shaft really pushing on that  and expanding the penis for more girth. Then if you don't think the pressure is still enough you can always apply that second hand again. Now from here I even think that first hand is just enough. I'm even going to hold that. You don't even change up the sides that you are actually feeling that pressure so from right to left or top to bottom you can actually simply push to the side that you want to be stretched. So right now I'm getting a nice big stretch around here from the other side. And please take this into consideration guys, you are at full erection. I'm not saying bend your penis 90 degrees I'm literally just tweaking it just a tiny amount so that pressure builds up.

If you feel like there's too much of a bend what I'd recommend is placing more pressure throughout the mid shaft and then just applying a little bit of pressure to the side. From there even just pushing it with my thumb I'm getting all that pressure through this side. I can even do it to the top. Pushing from the bottom. You feel that tremendous amount of pressure throughout the top side of my penis and through the bottom as well. If I'm pushing on the top I'm feeling it through the bottom.

Now obviously from here as well guys you can go into a jog so just take it easy with this one as well because you are transferring all that pressure closer to the glands. And that's essentially just go through all the variations that we've already gone over and you can literally just use the clamp to assist with a lot more pressure within the corpus cavernosum obviously yielding greater results only if you're up to that kind of experience level. Holding the top of the penis nice and lightly taking all that pressure away from the glands as well and pulling back down.

I'm going to keep the clamp on just past what I think I should keep it on just so I can actually show you what happens to the glands. You can actually see it slightly changing color now which is a few purple spots coming up. This is the point where I'm going to take it off but just so you know what to pay attention to I'm going to give you one more exercise and by that time I reckon it'll turn to a particular color that I do not want you guys to reach. I'm literally just doing this for the sake of the video.

The last one guys is going to be the mushroom tip maker. Now you're obviously going to keep that pressure built up and you're just going for pretty much a full hand squeeze just like the mushroom maker. All right. So, it's not only I feel increases the pressure throughout the shaft as well but it's obviously also definitely going to transfer up to the glands. Now, whether or not you do that just with a normal jog and then squeeze now I feel that all throughout the glands or if you just go straight to a full hold squeeze I can really feel the coronal ridge just bursting out there. Not in a bad way, but I can just feel how hard the coronal ridge is and that's a good sign that there is enough pressure that is going to hopefully cause enough stress or that penis fills up with just the right amount of blood.

All right guys. So, as you can see just through head is more purple marks coming up and throughout the side so it's gone from a pink and nice healthy color to a little bit darker. Now this is the point that I do not want you guys to get to. Now I've gone over the time that I'd recommend actually clamping for. I have cut the video just a little bit so it may not seem like a whole five minutes however this is the time I would definitely take it off and it is so easy to take off guys like real quick, pop that away. You can leave the band on because it's not causing as much pressure as the clamp and then just go back into some relatively fast jogs. If you don't want the band you can slip that off and then really try to get that color back again with some nice fast jogs.

I do find that doing jogs a little bit faster increases that blood flow a little more. Doing them a little bit too slow it could just let that blood come out a little too fast. So as much as you don't necessarily want to increase the pressure we just want to really get that blood to the head and throughout the shaft to make sure that we're not actually causing any damage that we don't want. All the best guys, I really hope you enjoy the video guys. And as always be the man you know you can be. I'll see you in the next video

VIDEO TUTORIAL: CLAMPING Demo DiscoStick

-->CLICK HERE FOR LG HANGER SYSTEM<--

.875" ID Girth Bands    1.0" ID Girth Bands   1.125" ID Girth Bands   1.25" ID Girth Bands

CLICK HERE FOR CLAMPS

- Alright, hey everyone. I'm here to show you the clamping method using the LG kit. They sell these on the LG Hanger website, and variety of sizes as far as these blue girth bands, so make sure to check them out, and thank you for providing me a kit. It is definitely worth it. So before we get in, we want to make sure that anybody who tries this has at least six months of dedicated PE training. Don't want to jump into this right off the bat. You're gonna be in a world of hurt if you try to do any of these. You gotta condition yourself, just like any other muscles before you jump to this. These are advanced exercises. Alright, so why clamping? First off, it promotes girth growth throughout the entire shaft and glands. It helps with vascular development, which leads to harder erections. Larger flaccid size. And you can use these girth bands after your session to help keep your flaccid sizes longer. Helps straighten erection curves due to the slight bending and manipulation we will be doing. Obviously, you will be using these girth bands to prevent any skin pinching or unnecessary tension when you use the clamps. If you try to use the clamps by themselves, that is not comfortable. These girth bands really do help in making sure that this feels good and you're working what you need to work and you're not in pain. So as far as when to do these exercises, you can do them after you do a hanging session, which would be best. You can do 'em before, but after is better. Alright, now that we've gone through all of that, let's get straight to it and watch the video.
-DiscoStick

A NOTE FROM LG HANGER:
Anyone who has followed my training with the LG Hanger knows that I designed the system to not only be the most effective penis enlargement device, but also the safest. Prior to the LG Hanger many men opted for compression clamp devices that cut off circulation, caused excessive skin stretch, and had potential negative side effects that caused tissue and nerve damage.

I've always kept an open mind regarding other devices and their effectiveness. I believe pumping has it's place in promoting gains that can be synergistically combined with weight hanging and traditional hand stretches. That being said I'd be amiss if I didn't mention other PE exercises that promote gains. One such exercise device is Clamping.

I would consider Clamping an advanced girth exercise that should not be done by novice PE trainers. I wouldn't recommend anyone with less than a year of training to attempt to clamp.

It requires a significant amount of tissue maturity and conditioning, otherwise you could injure yourself.

Clamping is done while being erect in the 75% - 100% range. I refer to clamping as BFR = blood flow restriction. What you are essentially doing is forcing tissue expansion within the penile anatomy. This is primarily a girth building exercise, and will promote significant vascular development.

If you believe you have the proper amount of tissue maturity and are ready to try clamping, then I suggest the following...

First and foremost have comfortable padding / wrap under the clamp area. I highly recommend our silicon rubber Girth Band. They are soft and pliable and provide a mild amount of compression by itself, it will also prevent the clamp from pinching skin. Install a Girth Band at the base of your erect penis. Apply the clamp and cinch / ratchet down until you feel your penis swell. Only you can determine the appropriate amount of clamp pressure. I suggest starting with the minimum and gradually working up as you become more experienced and determine how you respond. The clamp session should not exceed 5 minutes in length. You can do as many as three clamp sessions all five minutes in length. Between each session take a five minute break and massage / jelq your penis to promote expansion and promote fresh blood flow. Experiment with this a few weeks, as many as three times per week and see how you respond.

Once you've become accustomed to the single clamp, you can try double clamping. Same procedure.... except this time install a second Girth Band at mid-shaft and then the second clamp. Same five minute / three sessions. If done properly this exercise is a really girth builder! The vascular development of veins and capillaries is no less than phenomenal.

Never do clamping prior to hanging. You can however pump after a clamp session.

Best wishes in your PE training - LGHanger

VIDEO TUTORIAL: Circumcised Men Wrapping Method

-->CLICK HERE FOR LG HANGER SYSTEM<--

DiscoStick Demo Wrap Prep Blue Tape

Hey everyone this is just a quick wrapping video per the LG manual. So first thing is you'll want to make sure you have your girth band on, I like to double mine up to keep the pressure. And then you'll take your tape, and you'll start about an inch below, you'll make your way around, make sure it's all nice and smooth. I'm gonna wrap up towards the top having a little bit hang off. And just kinda squeeze it together at the end there. Squeeze it, and then fold it under, so it all sticks together, so you might wanna hold that for a little bit. Hold down here, kinda squeeze everything in. You don't wanna squeeze too tight, just enough for everything to stick.

Just keep on holding. So it seems pretty good. Let's just wrap down, and you can hold that if it's not staying, and then put that in your hanger, and fold down the silicone. And you are ready to go.

So I hope that helps some of the technique as far as hanging with an LG hanger, and your wrap technique. I am circumcised obviously so, you'll want to check the manual for the uncircumcised option.

DiscoStick Demo Wrap Prep Beige Tape (personal preference)

- Alright, so the first thing you wanna do is get about 80 to 90% hard. I do this with the two girth bands and I'll show you how those come into play in just a second. And then we're gonna go ahead and do a wrap, just about half an inch below the glans. Just make sure it's nice and tight. Wrap it all around. Nice little opening there. And then we'll just hold this down, just try to get a full grip if possible, then just kinda squeeze and squeeze 'em together. That helps tighten it up. Make sure it's nice and secure. Not too tight, don't wanna hurt yourself. 

Alright, so we still got that little opening, so I have this band here. Another piece, and just wrap it across like so. Then you hold that in place, make sure everything stuck together. Give it just kind of a pulsing motion to keep it all good. That should be okay. Looks like everything's good. Still need to put our LG Hanger on there to get it wrapped up. Now, I just gotta pull down and just kinda slide it all the way across. Okay, pull out any kinks. Then we're gonna roll this back. 

Make sure it's nice and tight. Check the inside, everything looks good. Still together. Then we're gonna pull this first band up by the head and then we're gonna pull the bottom one around at the bottom, and that gives me a pretty nice tight fit for my hangs. Serves me well so far. So now, we're ready to pump and we're ready to hang. Hope you enjoyed.

VIDEO TUTORIAL: Wrapping & Hanging

-->CLICK HERE FOR LG HANGER SYSTEM<--

Client demonstrates how he does a circumcised wrap & prep with Girth Bands before hanging with the LG Hanger Weight System for Penis Enlargement. Wrap, Girth Bands, and Weight System can be found on website: www.lghangerllc.com   Discount Coupon Code for Weight Systems: KINGSNAKE

CLIENT VIDEO DEMO: Girth Bands & LG Hanger System

-->CLICK HERE FOR LG HANGER SYSTEM<--

New Client Demonstration of the LG Hanger Girth Bands and Weight System

VIDEO TUTORIAL: V Jelq's for Penis Enlargement

The v-jelq puts more pressure on the sides of the shaft, really working the corpus cavernosa. 

Step by Step and Video Tutorial's below:

Step 1: Form a "V" sign with your hand (“V” with the split between your middle and ring finder).

Step 2: Move the same hand underneath your penis so that the center of the “V” is holding your penis straight up. At this point, your fingers should be pointing towards your abs. Tighten the V around the base of your penis and curl your fingers up so they are pointing at the ceiling.

Step 3: Move your hand up the base when it reaches the head of the penis, pause and let go.

Step 4: With your other hand repeat steps 1 – 3

When letting go with your hand, your other hand should simultaneously be in the starting position.

GIRTH BANDS-Information

WHAT IS A GIRTH BAND and WHAT IS ITS PURPOSE?

-->CLICK HERE TO SEE ALL 4 SIZES OF GIRTH BANDS<--

What is a Girth Band, and why are they essential to effective penis enlargement?

As all men know your penis fluctuates in size when flaccid. Depending on what you are doing, temperatures and any stress you are experiencing will affect your flaccid size.

Within the penis enlargement community there’s a term often used to describe a small flaccid state, it’s called “turtling”. A metaphor relating to how a turtle pulls its head back into its shell when alarmed or cold. Similarly, your flaccid penis reacts the same way. So how does one prevent that and why is it important to prevent when engaged in a penis enlargement routine?

To prevent “turtling” or the retraction of your flaccid penis you must provide a mild amount of compression at the base of your penis. The LG Girth Band is the perfect solution to the “turtling” reaction.

Men who engage in a penis enlargement training have an ultimate goal to create a longer, fuller erect penis. This requires a significant amount of time and dedication to accomplish.

Anyone who has ever undergone an orthodontic treatment to correct the mis-alignment of their teeth knows that after the teeth are properly aligned a retainer is made and worn to prevent the teeth from moving. Think of the Girth Band as a retainer. While you are growing your penis the Girth Band prevents retraction while your penis heals and recovers from the heavy training sessions. Over time you are training your penis to not “turtle” when flaccid. The recover and growth process are enhanced when your penis stays longer and fuller in the flaccid state.

There are many other applications where the LG Hanger Girth Band is appropriate.

Here are various ways the Girth Band can be used.

#1 – Hand stretching exercises. Use two girth bands to aid in enhancing your grip. Wear one at the base of your penis, another below the glans. This will enable you to get a much better grip while pulling. With one hand at your base grip your penis, using your other dominant hang grab your penis below the glans and pull. The Girth Bands will provide you with a much better grip and help prevent skin chaffing when your pulls become more intense.

#2 – Pumping – wear one at the base of your penis, this will provide a mild amount of compression and help you stay “engorged” to a fuller extent during your pump session, and if you have any issues with “ball suck” it will help prevent that too!

#3 – Clamping – wear a LG Hanger Girth Band under your clamp. They provide a nice cushion and prevent any skin pinch from the clamp. For more advanced clamping exercises you can use two Girth Bands. One with your base clamp and another with your mid-shaft clamp.

#4 – Sex – similar to a cock ring the LG Hanger Girth Band can be used like a cock ring during sex. Since it has a couple of ¼” ribs, one at each end it can provide some additional pleasure for your partner. Think of those ribs like a couple “speed bumps”.

Anyone who is serious about Penis Enlargement will benefit from using and wearing the LG Hanger Girth Band. One can ever be worn while sleeping to prevent retraction. If you’ve ever been embarrassed to walk around the men’s locker room naked or have had issues with a shy penis when standing at the urinal next to other men, no longer do you need to be embarrassed! Over time with a consistent training program and the use of the LG Hanger Girth Band your flaccid penis will hang like down like a small elephant trunk!

The LG Hanger Girth Band comes in four varied sizes, all are measured from the internal diameter. The four sizes start at:

.875 (7/8”)
1.000 (1”)
1.125 (1 1/8”)
1.250 (1 ¼”).

A *general guide line for choosing the appropriate size is to measure your ERECT penis at the base.

3” – 4” would use a .875 (7/8”)
4” – 5” would use a 1.000 (1”)
5” – 6” would use a 1.125 (1 1/8”)
6” + would use a 1.250 (1 ¼”)

*This is a general guide line. Just like a pair of shoes or pants, its a general guide line for fitting. If you kind of in between sizes, error to the smaller size as a smaller sleeve will stretch, were a larger can not be made smaller.

Of course, if you are right at the in-between size I recommend going to the lesser size, as you want the Girth Band to provide a decent amount of compression, but not to the point where your penis gets cold. And if you choose a size that feels a little too snug you can always stretch your Girth Band over a larger object for 24 hours to loosen it up a bit.

CLICK HERE TO SEE ALL 4 SIZES OF GIRTH BANDS

SILICON SLEEVES & GIRTH BANDS - What Size do I need?

We often get questions about what size silicon sleeve would be appropriate for my penis size.
-Our Sleeves come in five different sizes, and all diameter sizes are measured from the internal
diameter. They are - .75" or 3/4", .875" or 7/8", 1.0" or 1", 1.125" or 1 1/8", 1.375 or 1 3/8"  and all (except the .75" and 1.375 which are 4" long) are 8" long.
-The Girth Bands come in four different sizes and are also measured from the internal diameter.  They are-.875" or 7/8", 1.0", 1.125" or 1 1/8", and 1.25" or 1 1/4".

Generally speaking the size of your ERECT penis girth will determine the best size sleeve/Girth Band for you.
The circumference girth measurement or the diameter around your penis below the glans is
where I suggest the measurement be taken. The silicon sleeves are very pliable and will stretch
significantly without tearing! I have been able to take all three sizes of  sleeve's and easily stretch them over a baseball with no difficulty.

SLEEVES - Here is a *General Guide line:
*A general guideline for choosing the correct size would be to measure your ERECT penis base to mid shaft

If your girth circumference is 

3.0" - 3 3/4" then a .750 sleeve would be recommended.

3 3/4" - 4 1/2" then a .875" sleeve would be appropriate.

4 1/2" - 5 1/2" then a 1.0" sleeve would be appropriate.

5 1/2" - 6 5/8" then a 1.125" sleeve would be appropriate.

6 5/8" or larger in girth circumference then a 1.375" sleeve would be best

GIRTH BAND - Here is a *General Guide line:
*A general guideline for choosing the correct size would be to measure your ERECT penis at the base

If your girth circumference is:

3" - 4" then a .875" Girth Band would be recommended.

4" - 5" then a 1.0" Girth Band would be recommended.

5" - 6" then a 1.125" Girth Band would be recommended.

6" plus, then a 1.250" Girth Band would be recommended.

*These are general guide lines. Just like a pair of shoes or pants, its a general guide line for fitting. If you kind of in between sizes, error to the smaller size as a smaller sleeve will stretch, were a larger can not be made smaller.

    Of course this is just a suggested guideline, if you fall in the middle of a Sleeve/Girth Band size, I always recommend the smaller Sleeve/Girth Band, as it is better to be a little more snug than too loose. As you can
always stretch a smaller Sleeve/Girth Band larger by stretching it over a larger object for 24 - 48 hours to loosen it up for a more comfortable fit.
    One of our larger guys has a 7.5" girth circumference. His 1.125" sleeve felt a little too tight, so I suggested he stretch his sleeve out larger. He decided to purchase a couple new sleeves and asked if I would stretch them over sized for him, so I rolled the sleeves up and stretched them up over a baseball bat barrel for 48 hours and they loosened up to fit him perfectly.
    How your sleeve fits you is obviously a matter of preference. So you may want to experiment
with a couple different sizes. Guys who use our sleeve for pumping tell me they use one that is
looser for that application than they do for the weight hanging. So it's really up to you the kind
of feel you want.

VIDEO TUTORIAL: Fulcrum Exercise Demonstration By KingSnake LG Hanger Penis Enlargement

The Fulcrum is awesome for isolating specific areas and targeting where you want extra thickness. KingSnake Demonstrates his version of how he does the Fulcrum Exercise for Penis Enlargement.