BENZ Extender: How the Lever Works

 

CLICK BELOW TO WATCH HOW LEVERS WORK

--->CLICK HERE FOR EXTENDER<---

REVIEW: Benz Extender How it Works

 

CLICK BELOW TO WATCH REVIEW OF THE 

BENZ EXTENDER

--->CLICK HERE FOR BENZ EXT<---

Hey Lads! Thanks for joining me!

I wanted to tell you today about the New LG Hanger Benz Extender.

Now I’ve been lucky enough to have this for a couple of months now and I want to tell you all about my experience and tell you what this thing is like, Give you a little bit of a demonstration, Talk with you about the build and the quality of this device, and turn you guys on to something that is not only going to last you a life time of PE but is also going to give you some great results.

And I have never been stretched like I have been stretched from this device here.

Now I’ve been hanging for many years, and I have used extenders and most of the time I just file them away or throw them out. This thing I’m going to always use. Its just that good.

So let me get right into it.

I’m going to talk with about the precision made components which they are, they’re machined on a three axes CNC mill and they use, well its really Marlon from LG Hanger who is the foreman of the shop and he uses high quality materials like aluminum, stainless steel, and brass and all of this is none corrosive. This thing is going to remain in this condition for its lifetime.

Now these springs are rated at fourteen point five pounds under one inch of compression and twenty point four pounds with you know, fully compressed. Trust me, trust me, I doubt that your going to get close to cranking this thing anywhere near twenty pounds. And I mean you know, thirteen pounds a day, and you know this is enough springage for you.

And uh there’s two things about this particular device that are amazing now, um of course we have the stabilizer bar which you see on most units of course that’s mandatory, but that is not the amazing thing about this.

Two amazing things about this that they work in tandem with each other, and that is the Fulcrum here, this Fulcrum bar which has 1.9 inches of adjustment length which is a lot, and we also have this, and this is almost like between that this, this pivoting base which pivots um this adjustable pelvic ring pivots ninety degrees both upper and lower. Its incredible. That in conjunction with this Fulcrum is the crown jewel of this extender.

I saw a lot of people belly aching on Reddit about, uh oh well it’s a lot of money for this device and, yes it is, this device is expensive and its not meant for everybody. SO, there you have it, it might not be for you and that’s ok.

Uh, for the people it is for you guy are going to love it because this stretch that you can get from this extender is second to none in my opinion. And it, there is one thing that I tried here, I tried it straight down, like this…

And there was quite a bit of tension on here. It was probably at the end of my session. And I positioned the Fulcrum, its very simple, right now I have it loose and free flowing,  and just do like this and…, its done, its not moving anywhere.

Alright, so, I had it facing straight down. And I had, a bit of tension like I told you and, this device starts to go like this and, almost underneath me like a BTC stretch. It was really really good.

And um, its just one of those things that, you know, what other device does this? And, no other device does this. No other device has a Fulcrum that is, not, um this Fulcrum is just intrusive enough to give you the kind of um, bend that you need. This stretch, additional stretch that you need, without hurting you, and that is really important. Um da, one of the things that I really like about LG Hangers stuff is that its built with safety in mind.

Now the way that this ring is cut, its very easy to go in here, and what I like to use, is with this, just reaching back here to get it, is LG Hangers Chamber. Ok.

Now, can you use other chambers with this, absolutely. Absolutely, there’s a hook right here,  you have a hook on top of your chamber, your grand, your ready to go. Your ready to stretch.

Now, the reason I like this is because they made this, they made this chamber to my size. Also, the medical grade material that’s used on these sleeves is just incredible so everything feels really custom fit, and I like that, I like that, again, this chamber is not inexpensive. Its not for everybody. If your struggling to, to make ends meet, this is probably not the device you need. But if you want to have a premium device that’s going to last you a life time, from somebody whos going to give you incredible support, Marlons the guy over at LG Hanger. I know it sounds like an, ah, ah, paid avert, but it ain’t, ok. I’m telling you my experience. I’ve been this for years now. And I highly recommend him. I have bothered him at all hours. Uh, sorry Marlon. Uh, and he’s always helped me. He’s always gotten back to me, and what else can you say guys. Just what else can you say.

And now I’m going to give you a wee demonstration.

Ok guys I’m going to show you exactly how I use this, minus using my own penis because, it’s YouTube, you know, its twenty twenty four, you know how it goes here.

So the first thing I’ve done, is I’ve rolled up the sleeve and I’m ready to insert my penis, this’ll this’ll reflect myself, and I’ve put myself in, now I’m going to roll uh, the sleeve down on top of it.

Lets see if I can get it down. Now, now usually there is a rubber band here. And I don’t know why I’ve took mine off, I just did. So, there you go.

Anyways, so I’ve rolled the sleeve all the way down and now what I do next is I put on this piece of Velcro at the base of the sleeve, So I can get an absolute airtight situation going on.

Then what I do is I take the pump, I’m just gong to insert it right here. And I pump pump pump pump pump. As you can see I’ve used this a lot. And then, yeah. I’ve, I use this thing every day. So let me take this thing off. Come off, and right now what I’ve got is I have myself inside the chamber.

So what I do is I take this pelvic cushion and I simply just stretch it over.

So you have to imagine that this now is at the base. Just do a little of this. This is at the base base right here on my pelvic bone. OK, now all I do, I, to get into the extender, this, I make sure that the fulcrum is at the upper most position. And I go in through here. Very easy and, just like that. SO you can imagine that this, is right up against my pelvic bone. Now I’m ready to start the stretch.

Now what I do is I usually pull the Fulcrum back to the lowest position because I have these thumb screws at the lowest position. Now I was just screwing them upward. Because this has taken me so many takes, I’ve forgot to put them  down.

So I usually start down here, with no tension or very very little, ok so, I hook up and I’m ready to go.

So right here, that’s when I start working these thumb screws up. Ok, and as it goes up Your going to notice that your penis goes further across this fulcrum. So, ok you might be even, you even have some of the sleeve on the Fulcrum. Don’t worry about it. This is of course length dependent.

If your very long, your going to start out longer and the Fulcrum going to be more over your shaft and if your not as long its going to be over the sleeve. Just not a big deal. Ok you are gong to gain length and if your very good with this, meaning if your disciplined with it, you are going to have gains. Theres no doubt about it. This thing gives you a stretch like you wouldn’t even believe. So, Um, your gong to believe it once you try it. Your going to see what I mean. Because this Fulcrum situation is unbelievable. If you can see what kind of angle you can get. I occasionally will do an angle like this. If I want to get kind of a BTC kind of thing going, um I might pull the Fulcrum a bit forward. And that’s very easy to do. Also you can move the Fulcrum within the session. Which is brilliant. Ok, so, just, its very easy. That’s also why I like to put a wee bit of cocoanut oil on here. Just a wee bit. Ok, that way my skin slides over it nice an easy. But there have been many times, many session when I haven’t used it and its not a big deal. Locking the adjustable pelvic ring is just like super simple. Ok, very very simple, and these provide a lot of pressure, this does not move. So that’s pretty much it. If you have questions please put the questions down below. I look forward to hearing out the gains that you guys make this and your experience with using it. Please don’t hesitate to ask any questions in the comments section below. And I will be more than happy to answer them. Also, please do not forget, you have access to a discount, if you use the word IRISH in all caps, ok.

So best of luck and train safety.

Benz Extender with Adjustable Fulcrum Bar and Pivoting Pelvic Ring

The NEW Benz Extender

 -->CLICK HERE FOR THE BENZ EXTENDER<--

The above video shows the Benz Extender and how the adjustable Fulcrum Bar and Pelvic Pivot Head work. The springs generate over 20 pounds of tension and the Benz can be worn for extended times.

This is made of top quality materials right here in our own machine shop. We have limited quantities available so act fast and get your now.

EXTENDER Rods: How to Replace them

 REPLACING THE STANDARD SIZE RODS WITH THE XL RODS

CLICK BELOW TO WATCH THE TUTORIAL VIDEO

-->CLICK HERE TO PURCHASE EXTENDER<--

OK, to remove the standard length extender rods and replace them with the longer rods. 

This is what you’ll need to do. You need a 10 mm wrench or an adjustable crescent wrench. 

If you have one of the new extenders with the upgrade of the stable bar to prevent the twisting, then the first thing you need to do is just loosen these nuts and take them off. 

Disassemble these nuts off, take the stable bars off, remove this nuts and then you need to remove the spring bar which you can do by just doing this now. 

These thumb screws will have to come off. Also do both sides. You may have metal ones. We upgraded these to the brand here, so then the next thing you need to do, 

remove these also, or just loosen here on both sides. 

Righty tidy, lefty Lucy, and then just unscrew the threaded rod from the pelvic ring mounts. Take the nuts off and then reassemble using the long rods to screw the raw nuts onto each one and then put it back together the same way it was before. Back in the nuts backed off a little ways so that the rod fully threads down into the pivot mount and then take your ranch and snug that back up on both sides. So now we’re gonna go put everything back the way it was. Put both of these back on however long your penis is. You’re gonna make the adjustment and then like I said this this is goes back on like that. Both sides will go in here down there and then put the other thumbs on top reassemble the spring, the stable bar on top with the four nuts two on the bottom of this plate two on the top, snug it back up with your tender ranch or your adjustable crescent wrench and that’s it!

VIDEO TUTORIAL: LGH Extender Demo by DiscoStick

LG Hanger Extender Tutorial Video Demo by DiscoStick

All right. Hey everyone, I'm going to be going over LG's new product, called the LG Extender. Let's go right here. Great quality. And so we're going to be going over how to install it. Now just keep in mind this is an accessory, so you will need the LG Hanger already. This is a good method to stretch if you don't want to use any weights. These springs will create the tension for you, so it's pretty nice.

So let's get to installing.

So first you're going to need to make sure that your LG Hanger is ready, secured, and on. And then, as you see already, I've unscrewed the top little hook here. So you need to unscrew it. The LG Extender will come with a 10 millimeter wrench. This is my own, but they will have some for you. So, yeah, just unscrew I. And then you're going to screw in this top attachment. Now you want to make sure that the flat side is pointing out, not towards the LG Hanger. Because there are some grooves in here that the springs will fit into, so make sure that the flat part is facing out. All right, so you're just going to screw in the hole. I usually just do finger-type first. Get it all the way in until you can't screw in with your finger anymore, and then you get the wrench to finish it off. Make sure it's nice and tight.

All right, so as you see, we are good to go. Flat site up. So now as far as the extender goes, what you'll do is you'll grab the opening here on the base ring and you'll slide it over your penis. At the base, make sure it's at the base. And then once it's on, make sure it's firmly at the base. Now as far as the springs go ... I want to make sure we got a good angle here. So the springs, you're just going to slide back and put into the groove. Alright, so same with the other side. Slide back and put into the groove.

All right, so from here you can then go ahead and tighten up the tension equally. All right. And so then you'll get a nice pull.

So that's pretty much it. And then you're installed and you're ready to to do your thing. Now this is meant to be used stationary. You can move around a little bit with it, but it's very minimal movement. So just take caution if you do try to be mobile. One other thing are these little safety bolts up here ... Or safety screws. So you want to use these at the top of your tension, wherever you want to stop, and this will make sure you don't get any more tension. Helps keep things nice and secure and a little more put together when you add these in.

So that's all. It's really easy to install, really easy to use. I've enjoyed using it. As far as the quality, it's definitely top notch. I couldn't recommend it more. I've used it a few times already. So hopefully you all enjoyed this video, and enjoy your hanging.

Thanks.

VIDEO TUTORIAL: LGH Extender Demo by TotalMan

Click Below for the LGH Extender Demo PART ONE

Click Below for the LGH Extender Demo PART TWO

-->CLICK HERE FOR LGH EXTENDER<--

In this video, guys, I'll be taking you through how to not only set up the LG Hanger to the new rod system while at the time of this video, how to actually set up the bar that it comes with on the rod system, on to the LG Hanger, super simple. And then, I'll actually show you how to attach, in my opinion, the best way possible.

Now I won't be going into too much depth on actually how to attach the actual chamber itself. This video is mainly to cover how the rod system is not only going to be hooked up from the top bar onto the chamber, how to actually attach once you're in the rod system, but also how to adjust the system as well.

So first things first, you're most likely going to need maybe some pair of pliers, or even a shifter of some sort to fit on that head just there.

So what we're going to do is loosen off that nut nice and simple. As you can see, it comes off nice and easy, undo and undo the last long one. As you can see, it's precisely been machined in there. We're going to take that top bar off so you can chuck it on nice and easy, . pull down the springs, so you can detach that, or you can literally just undo the nuts and it will free up the springs a lot more.

What you're going to do is pretty much position this straight on the top of your LG Hanger chamber, place it through the hole, and screwing it back in just as if you were screwing the ice screw in. I just realized, I said  screw before, but it is an eye screw.

So once it's actually in your chamber, go ahead and tighten up that nut. Make sure it's nice and tight. Not too tight, it's actually not going to go anywhere. It's just so that this actually doesn't spin around at all.

Now all you have to do is attach the chamber and I'll show you the rest.

Okay, guys, for the sake of this tutorial, I won't be going into too much depth about the LG Hanger chamber itself. However, I do want to give you a couple more tips on the way that this may attach, and another method that I actually found, which I almost was trying to avoid, but it seems to actually work for me in my personal opinion, a little bit better and a little bit easier.

Now, all I do is literally get a little bit of coconut oil, like tiny, you almost can't even see that. And, what I'm going to do is put it on the outside of the chamber, all the way down the sleeve. And I'm actually going to not roll, but slide the sleeve up. You'll see how easy it comes up.

So now I've got a real slippery surface on the underside of the sleeve, technically the outside when it's going to slide down, and now I'm faced with the inside of the sleeve and the inside of the chamber.

Now as always, I like to get a little bit of tissue just to put it on the bottom, to save from any of the taping damp or getting moisture just from, I guess the heat of your penis. Plus guys, we're actually pulling on the urethra and the other end of the urethra is obviously the bladder. So the chances of actually pulling through fluids is kind of high, so that's why I always advise you to chuck in a little bit of tissue down the bottom.

Now I'm not going to take you through the taping method. If you want to see how to tape, do go to the ultimate taping guide, or the LG Hanger attaching video, or the taping guide for the LG Hanger.

Now, my next recommendation guys, before you actually put the chamber on, it does get a little bit fiddly, but you do have to put the extender or the rod system on first, purely for the fact that the chamber won't actually fit through the pelvis ring.

Now you might ask, well, why don't they make the pelvis ring a little bigger? Because you actually want this to be a nice close circumference to the size of your penis as well, so that comfort is going to be delivered in the pelvic ring.

Now another recommendation I would give you is possibly get a little bit of sleeve just for some extra comfort, and, all I do with that is place it on the pelvis ring. So you've not only got this soft bit of plastic on the pelvis, and it is a nice size as well, but just to add a little bit of extra comfort, all I'm going to do is place this over the pelvic ring and over the rods a little bit.

Now what it's going to look like is a little opening that you can easily slide through. Even though that looks nice and small, it is just silicon, so that's going to be the inside of the pelvis ring. Just adds that little bit of extra layer of fat, extra comfort and feels really good.

Not to mention guys, what I'm also going to recommend is once you've got the tape on, not before, don't touch any oil before you go for the tape. You want this tape to be as adhesive as possible, to make sure you get the maximum protection out of your tape. So once your tape is on securely, I'd advise chucking some oil on, just on the mid shaft all the way up to the tape, but try not to actually get the tape. As I'm putting the oil on, I'm actually going to go all the way up the pelvis. So you're literally lubricating literally everything.

Now the reason being is, if you do try to move with that pelvic ring, and you've got high amounts of tension and dry skin is either on a dry pelvic ring or dry silicon, well it's not going to be too comfortable, because you're just going to get your skin gripping, and you really just want the skin to be able to slide freely. And the only thing that's going to have the tension is the inside tissues of the penis. Now that's what we want.

So once there, once all lubricated up, you're going to pop on through. Again guys, you don't need the sleeve, but you'll literally just be putting your penis right through the ring as I'm doing here. Now just to make sure that the pelvis ring is sitting right up, I'm actually going to try pull through as much skin as I can. So by the time I am on full tension, that tension isn't necessarily pulling on the skin, it's actually pulling on the internal tissues.

So I'm just going to pull through as much skin as I can, even give it a wiggle, shake up and down. Now once that's set, the silicon actually helps to actually keep the pelvis ring there while you're grabbing and moving around. Notice I can actually shake and everything, and it's not sliding down. Because it is a little bit fiddly, especially when you're standing up like I am, you may want to slide down, so this really helps it.

Now the next step guys is grabbing the LG Hanger chamber. I do actually like to get the remnants or the leftover of oil, so my hands are a little bit oily, and all I'm going to do is just escape on the inside of the chamber. And this is only going to work if the chamber is 100% clean, so make sure to you clean your chamber every single time. And you'll see that I could literally just on in, all I do is give it a few twists around, and I'm pretty much all the way at the end using your vacuum hose and trigger.

Now my preferred pressure is lately around about 15 to start with. If you get your glans right to the end, now the only trouble with having that sleeve slide all the way up, is, obviously it's going to cover the clear acrylic, and the actually see where your glans are. Now as long as your glans are right at the end, you're all good. Now all I like to do is just push down a tad. If I see that it's all there, pump up to 15, all good, I'm going to pull my skin back and simply slide down the sleeve.

Now that oil on the inside, or should I say outside of the sleeve on the chamber, is literally just going to slide down like you've just seen. It's a real, real simple. That pressure still on 15. Now the pressure guys is really dependent on personal preference. Not to mention where you're up to in your penis enlargement journey, especially with any vacuum based devices like the LG Hanger chamber.

But once you're there and you're comfortable, you're all good, you can even have a few warm ups if you want, so stretching out, stretching left.

Now I would advise just staying where you need the springs first. If you even just want to line it up, just say, for instance, if I push the rod system all the way back onto my pelvis, and the springs, well they're going to be pretty loaded by the time I pull those springs backs. So what I'm going to do is under these nuts, get them closer toward the bottom. Just make sure that it's nice and even on both sides. Pull those springs down.

Now what you're going to do ... Now, it's as simple as this guys, all you're going to do is pull the spring down, clip it in, because what you'll find is at the bottom of this little frame at the top that bolts onto the LG Hanger chamber, there's little grooves on the inside of that little frame here. So what I'm going to do is push the spring down, the spring's going to go within the frame, and now I've got pretty adequate tension as it is, which I can just stay there.

Now without actually tightening up these top nuts, you'll find that when you do apply attention, the system's going to want to twist either way. To actually prevent that, what we're going to do is close up these nuts. As you start going down with the top nuts, you'll find that the springs compress, and this actually gives the system a nice lot of rigidity.

So we're good. Now, if I wanted to apply a bit more attention, please note this guys, because I had to find out the hard way. I tried to tighten up the system by just screwing these bottom nuts. Now you can do that, just be wary about how much the springs are actually shortening and coming closer together.

What you want to do is, most likely under the top nuts first, you want to get some gap so that the frame attached to the LG Hanger a chamber isn't actually touching the nuts, okay? So notice how there's a bit of gap. Now what I'm going to do is actually start tightening the bottom two nuts, and I'll actually feel pressure start to pick up.

So almost see it like this. The bottom nuts or thumb nuts are literally for a tension and intensity, and then the top nuts are literally for the rigidity of the device so that it doesn't sway or feel really loose.

Now the way that I like to travel through my routine is, under the top nuts tighten up to a tension that feels adequate for my session, especially when you just start out guys. I would recommend really starting out slow. You want to get to that happy tension. And what I mean by happy tension guys, is, you'll be able to go down, go up, and it's still comfortable, all right? There's not too much pressure.

Now with any vacuum based device guys, you literally want to up the intensity nice and slow, because the glans need time to accommodate. So this is the fantastic thing about the extender. Let's say compared to hanging. If you were to hang, you'd be taking the weights off, putting them back on again, adjusting and trying to incrementally increase the weight, while trying to hold onto the chamber, so you don't lose that accommodation of pressure that the glans have just gone through.

So I like to pretty much get to a tension that I'm comfortable, that I can literally put the device up, down and move it around anywhere I like, and pretty much stand up or even sit down. Now what I'm going to do is meet where the frame is with the top nuts, and now I'm going to wind up and build some tension on the springs, maybe even just half a centimeter. So you'll notice that these are closing up, about half a centimeter, match it on the other side.

Fantastic thing about this device guys is that you can easily see where you're at in terms of movement. You can even set these top rods as kind of like a goal where you want to achieve maybe in the next six months or so.

So, while I've actually adjusted these bottom nuts, now, as I get through my workout or session, as I feel like my glans become accommodated to the pressure within the chamber, all I'm going to do is literally unscrew one, two half turns to make a whole turn. I can feel that pressure increase just a little bit, and then I'll leave it there for maybe another five minutes.

As soon as I feel like my glans are okay and I feel like I can actually go up in intensity again, a full rotation of the nuts, comfortable, good. And I can pretty much keep doing this until my glans either feel uncomfortable, or, I think that I'm at an adequate amount of tension where I can get to a good level of fatigue.

Now detaching guys is as simple as undoing those bottom nuts, due to a point where it feels like the springs are nice and loose and it's always coming off that top frame. And then all I like to do is literally just pull down one side, unclip, pull down the other side of the spring and unclip. And then all you're going to be left with is the chamber, which you simply remove and slide the extender off.

All the best guys. Any questions, let me know. I'll see you in the next video.