VENTED Glans Cap Now Available

 

The NEW Vented Glans Cap

-->CLICK HERE FOR VENTED GLANS CAP<--

We've had some clients request a Vented Cap for hanging and have decided to add one to our ever growing product line of men's male enhancement items. 

It is a one size fits all and is super stretchy. 

The cap measurements are approximately 45mm (1.77") by 22mm (.866") in width 
.

The VENTED Glands cap is a great addition to the LG Hanger and can be used to help protect the glands while inside the chamber, making it the most comfortable hanging system on the market today.

 Similar to a support stocking, this protector cap exerts a slight pressure on the surface of the skin, reliably preventing side-effects such as swelling of the glans. The vents help with sweat issues and suction in the port area of your chamber.

The direct link to our Glans Caps:

EXTENDER Rods: How to Replace them

 REPLACING THE STANDARD SIZE RODS WITH THE XL RODS

CLICK BELOW TO WATCH THE TUTORIAL VIDEO

-->CLICK HERE TO PURCHASE EXTENDER<--

OK, to remove the standard length extender rods and replace them with the longer rods. 

This is what you’ll need to do. You need a 10 mm wrench or an adjustable crescent wrench. 

If you have one of the new extenders with the upgrade of the stable bar to prevent the twisting, then the first thing you need to do is just loosen these nuts and take them off. 

Disassemble these nuts off, take the stable bars off, remove this nuts and then you need to remove the spring bar which you can do by just doing this now. 

These thumb screws will have to come off. Also do both sides. You may have metal ones. We upgraded these to the brand here, so then the next thing you need to do, 

remove these also, or just loosen here on both sides. 

Righty tidy, lefty Lucy, and then just unscrew the threaded rod from the pelvic ring mounts. Take the nuts off and then reassemble using the long rods to screw the raw nuts onto each one and then put it back together the same way it was before. Back in the nuts backed off a little ways so that the rod fully threads down into the pivot mount and then take your ranch and snug that back up on both sides. So now we’re gonna go put everything back the way it was. Put both of these back on however long your penis is. You’re gonna make the adjustment and then like I said this this is goes back on like that. Both sides will go in here down there and then put the other thumbs on top reassemble the spring, the stable bar on top with the four nuts two on the bottom of this plate two on the top, snug it back up with your tender ranch or your adjustable crescent wrench and that’s it!

NEW Vented All Night Cap For ADANS-(All Day All Night System)

The NEW Vented All Night Cap  

Click on the movie below for a 360 view of the vented cap

-->CLICK HERE FOR ADANS WITH VENTED CAP<--

Introducing the New A.D.A.N.S (All Day All Night System!)

We here at LG Hanger have been listening to our clients requests for an All Night System and have invented a NEW Vented Cap!

These are new to the market and we have made a limited quantity of 35 to be marketed for feed back!

The Vented caps will be sold on our website until gone and we would appreciate feedback!

Both the Day and Vented Night cap will be included in the ADANS system linked at the bottom of this email.

The new Night Vented cap is wider than the Day use cap and is not only comfortable enough to wear all night, 

but prevents sweat build up, suction issues, and the potential for blisters while sleeping because the included sleeve will be doing the bulk of the work.

Chamber & System: Putting on and Removing

 How to Put on and Remove your Chamber

--->CLICK HERE FOR THE LGH WEIGHT HANGING SYSTEM<---

We’re gonna install our LG Hanger Chamber.

First thing your gonna wanna do is take your rubber sleeve and get it, stretch it, and roll it up over the mouth of the chamber to expose the mouth chamber.

So it’s a new sleeve, so it’s a little stiff

That’s how you do, so roll it up over your mouth of your chamber, so the chamber mouth is fully exposed.

Now we’re gonna install our chamber and I’m assuming everybody’s done their warm-up up, you know you got your glans protection wrap on, done some jelqing or are you heat lamp, or a warm shower.

 So your flaccid is fairly full as you can see here, there’s no skin wrinkles, um you can even say your slightly aroused maybe twenty, thirty percent, something like that. Ok now, we

showed you how to roll back the rubber of your chamber, now were gonna install the chamber, so

I use a Girth Band or section of sleeve. For demonstration purposes I’ll just use a section of sleeve cause I know not all you guys are buying Girth Bands, but, I recommend the Girth Band they’re a little bit better, but anyways,

So you’ve got your penis a little bit firm, you go ahead and insert your penis all the way, into the bottom of the chamber, see that. Then begin to roll the rubber sleeve back up over your penis, so see how I did that?

Now you got a little vacuum in there just because the sleeves tight on your skin, so roll that rubber back.

And you know I pretty much personalized my sleeve. I know how long I like it based on the length of my flaccid penis.

So there you are. Your sleeve is installed.

 I’m going to show you how to draw a vacuum out of your chamber.

So, take your… Plug it in, um mines a little off zero cause I dropped it but, imma show you a little trick, draw some vacuum out, about there, hold it for a few seconds,

1,2,3,4,5, release it, do it again.

Uh you see how my penis, glans is packing and filling the chamber? When I do that?

So imma release the pressure, imma do it a couple more times.

This is what’s called priming your chamber. Your getting your penis ready to hang the weight.

You know I’m a little over ten, based on my zeros not all the way to the bottom, but, so I’m about ten there, there you go, now I’m just going to release the pressure.

You can see the sleeve is tight. I’ve got a really good seal here, I can pull on that, its pretty difficult, hard I mean, and you can see.

Ok now here’s eight pounds of weight. I’m going to attach this to the end and then slowly lower it see.

See, there you go.

Alright, were going to remove the weight and remove the chamber now. You been hanging now for, whatever, uh, forty five minutes, and hour, whatever you know. So now, just take the weight and take it off the chamber.

Then, to remove the chamber, you just want to lose vacuum seal so, you find the end of your rubber, take a couple fingers, start pulling it down and there you go.

The LG Hanger System V. Other Vacuum Hangers

What's the difference between the LG Hanger Vacuum Based Weight Hanging System and other vacuum-based devices?"
The LG Hanger System is manufactured from a solid piece of optically clear acrylic
It is machined on a C.N.C. lathe and mill
The Chamber is sized, based on customer provided measurements
It's not injection molded from recycled plastics.
It's not made in China by slave labor, it's made in the United States.

There are several significant design differences that hugely effect the comfort and effectiveness.
Our chambers are ergonomically designed to conform to the shape of your penis.
The vacuum cups made in China are shaped like a bullet nose, and your glans is shaped more like a WW2 German helmet or mushroom.
Our chambers have a full radius at the bottom of the internal bore that allows for complete glans expansion. Bullet nosed caps don't.

 

LGH chambers are deeper and this is very important because you'll want the weight to pull from the entire shaft and not just the glans.
This if very important in helping to prevent blisters! Here's a rhetorical question... When you do hand stretches, do you pull from the glans or the shaft behind the glans. Easy answer, so why would you want to use a cup that pulls from the glans?

Our chambers incorporate an industrial grade pneumatic fitting that allows you to use a hand pump with an Hg vacuum gauge. This allows you to know exactly how much vacuum pressure you're extracting. Another important design feature that helps eliminate the potential blister. You have no way of knowing how much vacuum you're using with a cup. They use mouth, an enema bulb or a plastic siphon gizmo to draw an unknown amount of vacuum out, and typically it's too much.

All our chambers use a sturdy metal hook that's screwed into the top of the chamber, it's not a thin piece of wire. The last thing you want when you get up to heavier weight like 10 lbs. is for that thin wire to fail and have the weight drop onto your toes or foot!

Last of all we are the ONLY manufacturer that includes the BUNDLE hang option, for when you progress to more advanced PE exercise.

Weight Rings Measurement Guidelines

Suggest size for FLACCID girths

Hello PE Enthusiasts,

    Last year was a very productive year for LG Hanger! The design and development of our new 1 1/2 lb. weight ring has finally come to fruition. I'm pleased to say the long arduous process of manufacturing and testing is complete.

    We've listened and responded to requests to come up with a low traction / extended wear device that's user friendly and inexpensive enough for all men to enjoy and benefit from.

    While many men are interested in enhancing the size of their manhood, just as many are concerned about penile health and erection quality. Designing a device that could achieve both was of our main objective. With all the television ads that are addressing erectile dysfunction and Peyronie's disease, men are seeking solutions now more than ever.

    The pharmaceutical industry is at the forefront and wants men to believe that drugs are the solution to both problems.
We at LG Hanger endeavor to offer more of a holistic approach to problem solving these issues. Can a mild amount of traction placed upon the penis help to overcome ED and Peyronie's conditions? Many urologists are suggesting that it can. To buttress that observation, take a look at the various devices such as penis pumps , "extenders" and all-day stretcher devices that are currently being marketed with doctor endorsements. Many such devices are poorly made, expensive and not user friendly.
We read thousands of forum reviews, personal emails and field numerous phone calls from men who back up that observation.

    Switching gears to those who are more interested in male enhancement or penis enlargement. I'm not going to get into the variety of reasons for men's personal motivations to enlarge their penis. There are just too many to address and I'm not Dr. Phil. Suffice it to say most men don't want to be what is considered average, and I've never heard any man other than Howard Stern brag about being less than average. So how does the LGH 1.5 lb. weight ring compliment those who train for size? It provides enough traction to prevent your penis from retracting or as the penis enlargement community refers to as "turtling". It's a supplemental device to be worn after more intense penis enlargement training, that will prevent your penis from retracting while you recover.

    There are four sizes, all of which are 1 1/2 lbs. Each size is commensurate with our LGH Girth Bands. It is recommended that you use a Girth Band or a portion of silicon sleeve under the weight ring to provide grip and comfort.
You can however use a Tender tape wrap under the weight ring if desired. It's important to choose the appropriate size for correct fit. The ring is held together with two magnets and once installed will employ a small amount of compression along with the grip of the silicon Girth Band or sleeve to hold it in place. This will ensure good blood flow and prevent any circulatory compromise.

    Extensive testing has determined that a single ring can be worn up to three continuous hours, however most men need to relieve themselves approximately every other hour depending on fluid intake. Since the rings are easy to installed and remove, bathroom breaks are easily accomplished. For those who want to use a little more weight, two rings can be worn simultaneously too. Testing revealed that two rings can be worn for approximately 1.5 to 2 hours with no difficulty. With two rings however you can experience a little bit of edema in the frenulum area. If so, a moderately snug compression wrap can be used to eliminate that condition after sustained wear times.

    Choosing which size LGH weight ring that is appropriate for you depends on a few things. I personally recommend that a LGH Girth Band or a section of one of our silicon sleeves is worn underneath the weight ring. A couple reasons for that are the Girth Band or section of silicon sleeve will provide comfort and prevent any potential skin pinch. Secondly it will help provide grip. The LGH weight rings are designed to be held in place with only a minimal amount of compression so as to not compromise circulation. They are not like a compression clamp that you can tighten up. The two halves are held together with two small magnets rated at 9 lbs. of pull, this ensures that the two halves will snap together when installed. A small gap of 3/32" or 2.4 mm was removed from the center of the two halves in order to help provide a minimal amount of compression. If you decide you do not want to use a Girth Band or section of silicon sleeve and instead want to use a wrap that's fine. However, you will likely want to use one size smaller of a ring. The reason is because both our LGH Girth Bands and sleeves all have a 1/8" or 3mm wall thickness that takes up space inside the internal diameter of the weight ring.
Lastly, depending on the location along the shaft where one places the weight ring is important too. There aren't too many men who have uniform girth throughout the entire length of their penis. Most men, including myself have a smaller girth circumference below the glans than at mid shaft. So, if you intend on wearing two rings, one below glans and one mid shaft you will probably require two different sizes of ring.

CLICK HERE FOR 1.125" Weight Ring

CLICK HERE FOR 1.250" Weight Ring

CLICK HERE FOR 1.375" Weight Ring

CLICK HERE FOR 1.500" Weight Ring

VIDEO: Magnetic Weight Ring Penis Stretcher

This summary is not available. Please click here to view the post.