Jelq Roller-How its machined & Use

 The Jelq Roller-One of a kind

----> CLICK FOR LINK <----

When you purchase a LGH Jelq Roller you're not going to get something 

made of plastic and insulation foam rubber.

You'll be getting a device that has been ergonomically designed for rigidity and safety. 

A device that has been manufactured from the best materials money can buy. 

The Jelq Roller arms are manufactured on a 3 axis C.N.C. mill out of solid billet T-6061 aluminum. 

The roller cores are also aluminum and the roller shafts stainless steel. 

The rollers themselves are a medical grade silicon. Quality and effectiveness that is unsurpassed!

Check out the video below that shows the cutting of one of the Jelq Roller Arms.

Its just one of the many processes need to manufacture the finished product.

How its Made

Using the Jelq Roller

ARTICLE: JELQ ROLLER Replacing/Removing/Adjusting Rollers Pads

 Set Screwed installed

 tapped hole for the set screw

 Set screw and the 5/64th allen wrench

 Wrench and set screw prepped for install on the Jelq roller

 Insert set screw

 Insert Set screw and tighten

 Set screw lines up with the flat on roller shaft to keep it from turning

How the installed and tighten set screw should look

VIDEO REVIEW: LG Hanger Penis Enlargement System TOTAL MAN

---->CLICK HERE FOR LG HANGER SYSTEM<----

ENGLISH

Custom designed and crafted to your penis. 

World class, high quality materials, leaders in the field of vacuum penis hanging and penis enlargement. 

The highest likelihood of seeing the greatest results you've ever had. 

The LG Hanger. 

Okay, okay, before I get carried away too much, in this video, I'll be taking you through a full review of the LG Hanger vacuum-based penis hanger. I'd like to not only take you through my experience from, literally, start to finish, I'd also like to go over some pros, cons because I'd like to give you a full experience. I'm starting right at their website which is brilliantly designed and easy to navigate. Heaps of good information and easy to find the items and whatever you're looking for. The checkout was real simple. Obviously just enter in all your details and you're good to go. Now, upon contacting Marlin at LG Hanger, the response was instant, which I believe is a great sign. If customer service is great before you buy it, then I feel like you know that you'll be looked after once you do buy the product and if you ever need help thereon after. Now, because it is custom-made, literally, to your penis, and with the finest materials that obviously have to be purchased on their end, the expected manufacturing time that was emailed to me was seven to ten days, and time for postage to Australia from the U.S. was supposedly seven to fourteen days, so I was willing to wait a while. However, my product literally got to my post office within 10 days, which was awesome. Now if you're like me when you're ordering something and you want it the next day, not to worry because it is well worth the wait. And you know like the saying, good things come to those who wait. The e-mails were very prompt along with the receipt, tracking number, and all the check-ups. It was just a really smooth transaction. All I had to do was send them my measurements after the purchase and the next thing you know, ten days later, the product arrived. Finally, a LG Hanger.

-Dude, you got a new package.

-I know, man, I'm so excited.

-What is it?

- It's a vacuum penis hanger. You know, to hang weights off your penis to make some awesome length gain.

-  I'm sorry, what, wait.

- Was I supposed to keep that to myself? All righty, guys, the moment you've been waiting for, the, probably not the moment you've been waiting for but the unboxing of the LG Hanger. More or less a parcel, unparceling maybe. Let's go ahead and cut this puppy open. Oh there's another package. Oh there's another package. What is this, pass the parcel? At least we know that the product isn't gonna get damaged because this is actually like a bubble wrap packaging. So that is really good to know, that there's effort into the packaging. I think that's really when you know that there's a quality product inside.

 Oh, and there it is, woo-hoo. This is exciting. Wow, this is a big unit. I actually wasn't expecting it to be this big. It's got that brand new, fresh smell. So it literally comes like a package. I'm pretty sure there's a Velcro strap, kind of like a double-sided clip system that you put your whites onto. I've got some kind of firm tape, some brand new elastic bandage, the actual hanger chamber itself with some tubing so you can unclip or clip, what looks like about five to six inches of a silicon sleeve, two rubber bands. So I'm pretty sure I've got the package B. It's actually without one of the trigger handle pump. Now, the only reason I did this was because I actually have my own trigger handle pump with a gauge and all that actually hooks up to my LA vacuum pressure penis pump. And what it also comes with, which is real handy, is obviously an instruction manual. I actually got LG Hanger hanging system package B. 

Now for something that is absolutely custom, this thing is impeccable. It is honestly a masterpiece of design, ingenuity, creativity. It's not actually too heavy either. So what it comes with is a ready silicon sleeve attached, so obviously that's how you attach it with the rubber band. And it's pretty good, it comes with the vacuum hose. It can actually unclip and the vacuum pressure will maintain inside because there's a one way valve that springs into action so you don't lose any pressure and if you wanted to either take it off or even pump some more pressure in, you simply clip it in and off you go. Now obviously you do have this double sided clip system that you can probably use as like a clip and then clip it on your weights. Now depending on however you would hang your weights, what I wanna cover in another video is actually what I use. I use just a U shape kind of anchor, like this. Fully stainless steal, probably about four dollars Australian and a simple carabiner, also stainless steel, probably another few dollars. Now the reason why I like this, and especially with possibly a hanger like this, is because of how low line it is, right. So I actually hang my plate just here. It doesn't take up much distance at all. So even if you wanted to sit, it'd be really good. So to really quickly go over the pros and cons to the LG Hanger itself, and even in comparison to a normal compression hanger. Let's start with the cons, alright, gonna start with the negatives. It's a bit pricey, I must say, but it's custom made and the quality of this material, honestly, it's gonna be lifelong I reckon. It's so solid you can just about kill someone with it. Not that you would guys, all I'm saying is you get what you pay for. Now it may take some time getting used to, trying to figure it out and get the right fit, but once you do, it's good. 

There is a risk of getting blisters if you use it for too long without proper conditioning and you know you learn how to listen to your penis properly, so there is that risk. Another con is you may be limited to go to about 20 pounds, which is technically way more than enough and more than you should need because you should only be starting with one pound and slowly and incrementally be working your way up, conditioning the glands, skin, and other tissues, that obviously need that time. For instance, compression hanger, now in terms of the weight, just to give you an idea, comparing it to a compression hanger, there's literally almost no limit. Another con is it just may take a little tiny bit longer to put on then a compression hanger, but really no biggie. But comparing it to the amount of time you'll be saving because you won't need to take it off for up to an hour, you will definitely be saving a lot of time. So technically it's actually quickly. 

Now for the pros. The chamber is custom made to your penis. What other product does that guys? The quality is seriously high. Both of these pros is really where the price comes in. However it's so comfortable once you work out what feels right for you, the right fitting, the right pressure, the right length of sleeve, you're good to go. It's never, ever, ever cutting off any circulation, only allowing new, fresh flow of blood throughout the entire penis for the whole session. That is good news. It's stretching the entire penis from the glands all the away to the base and not just where a, let's say, a compression hanger would grab onto just behind the glands. Although one con was limited weight at 20 pounds, honestly it should be way more than enough for most hangers, especially if you're up to intermediate and even advanced. If you do it right and you don't allow the ligaments and particular tissues to tighten up and get too strong, that is way more than enough weight. 

Another pro is you can honestly hang for three times as longer then a compression hanger. It said in the instructions for the LG Hanger that you should probably go up to an hour, or you're allowed to go up to an hour, and you should probably check in, which is a good idea, however with a compression hanger, you literally have to take off the compression hanger, like the bib hanger or the male hanger, every 20 minutes just to restore that blood flow so there is that risk of cutting off blood circulation and it's also turning what would be once two hours of hanging into literally three hours. So a pro is you're saving actually a lot of time. 

And another pro is just great customer service and support. Now another thing I wanna mention is because of it's safety, in terms of not cutting off blood circulation or risking permanent damage, I don't even set my countdown timer like I would with a compression hanger for 20 minutes anymore. I just set my timer that goes up and will hang for as long as I need to and then just record the drop in weights to the time in my load. Also I've tried hanging with an ADS stretcher before and the chambers are just way too small. Even though it's nice and comfy when you're wearing it under clothes throughout the entire day, but they're not designed for a lot of weight like the LG Hanger is. For instance, I've tried hanging 11 pounds with an ADS like the Phallosan Forte, or even a stretcher I found off eBay which was only fifty bucks. The head of it was painful so I couldn't. Now with the LG Hanger, no problem. So would I recommend the LG Hanger? 110%. It has honestly been the comfiest vacuum pressure hanger or any device that I've actually used to hang that amount of weight that is obviously necessary to see those results that we're all wishing for if you're in the penis enlargement game. Now when it comes to the penis, your penis, my penis, we've all got just one. So I'm telling you right now, you get what you pay for and the more quality, even the more custom fit, just like the LG Hanger, the better your experience, comfort, results, but also safety. Safety is gonna be a huge one in this guys. The last thing we want is to be counter intuitive or productive and actually go backwards, cause injuries and possibly even permanent damage, alright. So yes, the LG Hanger, as maybe a con is a little bit expensive, but for the sake of the custom fit, the experience, the quality is just insane. If you've used the LG Hanger, let me know in the comments. I'd love to know about your experience. And if you have any questions about the LG Hanger or any videos that you would like me to include in the series to come, please leave them in the comments as well. I'd love to help and I'd love to do those videos for you as well. Also make sure to go across to LG Hanger's web

VIDEO TUTORIAL: LGH Extender Demo by DiscoStick

LG Hanger Extender Tutorial Video Demo by DiscoStick

All right. Hey everyone, I'm going to be going over LG's new product, called the LG Extender. Let's go right here. Great quality. And so we're going to be going over how to install it. Now just keep in mind this is an accessory, so you will need the LG Hanger already. This is a good method to stretch if you don't want to use any weights. These springs will create the tension for you, so it's pretty nice.

So let's get to installing.

So first you're going to need to make sure that your LG Hanger is ready, secured, and on. And then, as you see already, I've unscrewed the top little hook here. So you need to unscrew it. The LG Extender will come with a 10 millimeter wrench. This is my own, but they will have some for you. So, yeah, just unscrew I. And then you're going to screw in this top attachment. Now you want to make sure that the flat side is pointing out, not towards the LG Hanger. Because there are some grooves in here that the springs will fit into, so make sure that the flat part is facing out. All right, so you're just going to screw in the hole. I usually just do finger-type first. Get it all the way in until you can't screw in with your finger anymore, and then you get the wrench to finish it off. Make sure it's nice and tight.

All right, so as you see, we are good to go. Flat site up. So now as far as the extender goes, what you'll do is you'll grab the opening here on the base ring and you'll slide it over your penis. At the base, make sure it's at the base. And then once it's on, make sure it's firmly at the base. Now as far as the springs go ... I want to make sure we got a good angle here. So the springs, you're just going to slide back and put into the groove. Alright, so same with the other side. Slide back and put into the groove.

All right, so from here you can then go ahead and tighten up the tension equally. All right. And so then you'll get a nice pull.

So that's pretty much it. And then you're installed and you're ready to to do your thing. Now this is meant to be used stationary. You can move around a little bit with it, but it's very minimal movement. So just take caution if you do try to be mobile. One other thing are these little safety bolts up here ... Or safety screws. So you want to use these at the top of your tension, wherever you want to stop, and this will make sure you don't get any more tension. Helps keep things nice and secure and a little more put together when you add these in.

So that's all. It's really easy to install, really easy to use. I've enjoyed using it. As far as the quality, it's definitely top notch. I couldn't recommend it more. I've used it a few times already. So hopefully you all enjoyed this video, and enjoy your hanging.

Thanks.

VIDEO TUTORIAL: LGH Extender Demo by TotalMan

Click Below for the LGH Extender Demo PART ONE

Click Below for the LGH Extender Demo PART TWO

-->CLICK HERE FOR LGH EXTENDER<--

In this video, guys, I'll be taking you through how to not only set up the LG Hanger to the new rod system while at the time of this video, how to actually set up the bar that it comes with on the rod system, on to the LG Hanger, super simple. And then, I'll actually show you how to attach, in my opinion, the best way possible.

Now I won't be going into too much depth on actually how to attach the actual chamber itself. This video is mainly to cover how the rod system is not only going to be hooked up from the top bar onto the chamber, how to actually attach once you're in the rod system, but also how to adjust the system as well.

So first things first, you're most likely going to need maybe some pair of pliers, or even a shifter of some sort to fit on that head just there.

So what we're going to do is loosen off that nut nice and simple. As you can see, it comes off nice and easy, undo and undo the last long one. As you can see, it's precisely been machined in there. We're going to take that top bar off so you can chuck it on nice and easy, . pull down the springs, so you can detach that, or you can literally just undo the nuts and it will free up the springs a lot more.

What you're going to do is pretty much position this straight on the top of your LG Hanger chamber, place it through the hole, and screwing it back in just as if you were screwing the ice screw in. I just realized, I said  screw before, but it is an eye screw.

So once it's actually in your chamber, go ahead and tighten up that nut. Make sure it's nice and tight. Not too tight, it's actually not going to go anywhere. It's just so that this actually doesn't spin around at all.

Now all you have to do is attach the chamber and I'll show you the rest.

Okay, guys, for the sake of this tutorial, I won't be going into too much depth about the LG Hanger chamber itself. However, I do want to give you a couple more tips on the way that this may attach, and another method that I actually found, which I almost was trying to avoid, but it seems to actually work for me in my personal opinion, a little bit better and a little bit easier.

Now, all I do is literally get a little bit of coconut oil, like tiny, you almost can't even see that. And, what I'm going to do is put it on the outside of the chamber, all the way down the sleeve. And I'm actually going to not roll, but slide the sleeve up. You'll see how easy it comes up.

So now I've got a real slippery surface on the underside of the sleeve, technically the outside when it's going to slide down, and now I'm faced with the inside of the sleeve and the inside of the chamber.

Now as always, I like to get a little bit of tissue just to put it on the bottom, to save from any of the taping damp or getting moisture just from, I guess the heat of your penis. Plus guys, we're actually pulling on the urethra and the other end of the urethra is obviously the bladder. So the chances of actually pulling through fluids is kind of high, so that's why I always advise you to chuck in a little bit of tissue down the bottom.

Now I'm not going to take you through the taping method. If you want to see how to tape, do go to the ultimate taping guide, or the LG Hanger attaching video, or the taping guide for the LG Hanger.

Now, my next recommendation guys, before you actually put the chamber on, it does get a little bit fiddly, but you do have to put the extender or the rod system on first, purely for the fact that the chamber won't actually fit through the pelvis ring.

Now you might ask, well, why don't they make the pelvis ring a little bigger? Because you actually want this to be a nice close circumference to the size of your penis as well, so that comfort is going to be delivered in the pelvic ring.

Now another recommendation I would give you is possibly get a little bit of sleeve just for some extra comfort, and, all I do with that is place it on the pelvis ring. So you've not only got this soft bit of plastic on the pelvis, and it is a nice size as well, but just to add a little bit of extra comfort, all I'm going to do is place this over the pelvic ring and over the rods a little bit.

Now what it's going to look like is a little opening that you can easily slide through. Even though that looks nice and small, it is just silicon, so that's going to be the inside of the pelvis ring. Just adds that little bit of extra layer of fat, extra comfort and feels really good.

Not to mention guys, what I'm also going to recommend is once you've got the tape on, not before, don't touch any oil before you go for the tape. You want this tape to be as adhesive as possible, to make sure you get the maximum protection out of your tape. So once your tape is on securely, I'd advise chucking some oil on, just on the mid shaft all the way up to the tape, but try not to actually get the tape. As I'm putting the oil on, I'm actually going to go all the way up the pelvis. So you're literally lubricating literally everything.

Now the reason being is, if you do try to move with that pelvic ring, and you've got high amounts of tension and dry skin is either on a dry pelvic ring or dry silicon, well it's not going to be too comfortable, because you're just going to get your skin gripping, and you really just want the skin to be able to slide freely. And the only thing that's going to have the tension is the inside tissues of the penis. Now that's what we want.

So once there, once all lubricated up, you're going to pop on through. Again guys, you don't need the sleeve, but you'll literally just be putting your penis right through the ring as I'm doing here. Now just to make sure that the pelvis ring is sitting right up, I'm actually going to try pull through as much skin as I can. So by the time I am on full tension, that tension isn't necessarily pulling on the skin, it's actually pulling on the internal tissues.

So I'm just going to pull through as much skin as I can, even give it a wiggle, shake up and down. Now once that's set, the silicon actually helps to actually keep the pelvis ring there while you're grabbing and moving around. Notice I can actually shake and everything, and it's not sliding down. Because it is a little bit fiddly, especially when you're standing up like I am, you may want to slide down, so this really helps it.

Now the next step guys is grabbing the LG Hanger chamber. I do actually like to get the remnants or the leftover of oil, so my hands are a little bit oily, and all I'm going to do is just escape on the inside of the chamber. And this is only going to work if the chamber is 100% clean, so make sure to you clean your chamber every single time. And you'll see that I could literally just on in, all I do is give it a few twists around, and I'm pretty much all the way at the end using your vacuum hose and trigger.

Now my preferred pressure is lately around about 15 to start with. If you get your glans right to the end, now the only trouble with having that sleeve slide all the way up, is, obviously it's going to cover the clear acrylic, and the actually see where your glans are. Now as long as your glans are right at the end, you're all good. Now all I like to do is just push down a tad. If I see that it's all there, pump up to 15, all good, I'm going to pull my skin back and simply slide down the sleeve.

Now that oil on the inside, or should I say outside of the sleeve on the chamber, is literally just going to slide down like you've just seen. It's a real, real simple. That pressure still on 15. Now the pressure guys is really dependent on personal preference. Not to mention where you're up to in your penis enlargement journey, especially with any vacuum based devices like the LG Hanger chamber.

But once you're there and you're comfortable, you're all good, you can even have a few warm ups if you want, so stretching out, stretching left.

Now I would advise just staying where you need the springs first. If you even just want to line it up, just say, for instance, if I push the rod system all the way back onto my pelvis, and the springs, well they're going to be pretty loaded by the time I pull those springs backs. So what I'm going to do is under these nuts, get them closer toward the bottom. Just make sure that it's nice and even on both sides. Pull those springs down.

Now what you're going to do ... Now, it's as simple as this guys, all you're going to do is pull the spring down, clip it in, because what you'll find is at the bottom of this little frame at the top that bolts onto the LG Hanger chamber, there's little grooves on the inside of that little frame here. So what I'm going to do is push the spring down, the spring's going to go within the frame, and now I've got pretty adequate tension as it is, which I can just stay there.

Now without actually tightening up these top nuts, you'll find that when you do apply attention, the system's going to want to twist either way. To actually prevent that, what we're going to do is close up these nuts. As you start going down with the top nuts, you'll find that the springs compress, and this actually gives the system a nice lot of rigidity.

So we're good. Now, if I wanted to apply a bit more attention, please note this guys, because I had to find out the hard way. I tried to tighten up the system by just screwing these bottom nuts. Now you can do that, just be wary about how much the springs are actually shortening and coming closer together.

What you want to do is, most likely under the top nuts first, you want to get some gap so that the frame attached to the LG Hanger a chamber isn't actually touching the nuts, okay? So notice how there's a bit of gap. Now what I'm going to do is actually start tightening the bottom two nuts, and I'll actually feel pressure start to pick up.

So almost see it like this. The bottom nuts or thumb nuts are literally for a tension and intensity, and then the top nuts are literally for the rigidity of the device so that it doesn't sway or feel really loose.

Now the way that I like to travel through my routine is, under the top nuts tighten up to a tension that feels adequate for my session, especially when you just start out guys. I would recommend really starting out slow. You want to get to that happy tension. And what I mean by happy tension guys, is, you'll be able to go down, go up, and it's still comfortable, all right? There's not too much pressure.

Now with any vacuum based device guys, you literally want to up the intensity nice and slow, because the glans need time to accommodate. So this is the fantastic thing about the extender. Let's say compared to hanging. If you were to hang, you'd be taking the weights off, putting them back on again, adjusting and trying to incrementally increase the weight, while trying to hold onto the chamber, so you don't lose that accommodation of pressure that the glans have just gone through.

So I like to pretty much get to a tension that I'm comfortable, that I can literally put the device up, down and move it around anywhere I like, and pretty much stand up or even sit down. Now what I'm going to do is meet where the frame is with the top nuts, and now I'm going to wind up and build some tension on the springs, maybe even just half a centimeter. So you'll notice that these are closing up, about half a centimeter, match it on the other side.

Fantastic thing about this device guys is that you can easily see where you're at in terms of movement. You can even set these top rods as kind of like a goal where you want to achieve maybe in the next six months or so.

So, while I've actually adjusted these bottom nuts, now, as I get through my workout or session, as I feel like my glans become accommodated to the pressure within the chamber, all I'm going to do is literally unscrew one, two half turns to make a whole turn. I can feel that pressure increase just a little bit, and then I'll leave it there for maybe another five minutes.

As soon as I feel like my glans are okay and I feel like I can actually go up in intensity again, a full rotation of the nuts, comfortable, good. And I can pretty much keep doing this until my glans either feel uncomfortable, or, I think that I'm at an adequate amount of tension where I can get to a good level of fatigue.

Now detaching guys is as simple as undoing those bottom nuts, due to a point where it feels like the springs are nice and loose and it's always coming off that top frame. And then all I like to do is literally just pull down one side, unclip, pull down the other side of the spring and unclip. And then all you're going to be left with is the chamber, which you simply remove and slide the extender off.

All the best guys. Any questions, let me know. I'll see you in the next video.

VIDEO TUTORIAL: Replacing the Female Fitting

Replacing the Female Fitting on your LG Hanger Chamber

CLICK BELOW FOR VIDEO

Remove the existing fitting.
To remove the existing fitting use an adjustable wrench.
Turn the fitting counter clockwise to loosen.
Install the new fitting by screwing it in clockwise to tighten.
Turn until the rubber O Ring starts to compress against the spot face on the chamber
Position the fitting so that the silver release tab faces out.