When Size Matters

WWW.LGHANGERLLC.COM

EMAIL: LGHangerLLC@hotmail.com

BENZ Extender: How the Lever Works

 

CLICK BELOW TO WATCH HOW LEVERS WORK

--->CLICK HERE FOR EXTENDER<---

REVIEW: Benz Extender How it Works

 

CLICK BELOW TO WATCH REVIEW OF THE 

BENZ EXTENDER

--->CLICK HERE FOR BENZ EXT<---

Hey Lads! Thanks for joining me!

I wanted to tell you today about the New LG Hanger Benz Extender.

Now I’ve been lucky enough to have this for a couple of months now and I want to tell you all about my experience and tell you what this thing is like, Give you a little bit of a demonstration, Talk with you about the build and the quality of this device, and turn you guys on to something that is not only going to last you a life time of PE but is also going to give you some great results.

And I have never been stretched like I have been stretched from this device here.

Now I’ve been hanging for many years, and I have used extenders and most of the time I just file them away or throw them out. This thing I’m going to always use. Its just that good.

So let me get right into it.

I’m going to talk with about the precision made components which they are, they’re machined on a three axes CNC mill and they use, well its really Marlon from LG Hanger who is the foreman of the shop and he uses high quality materials like aluminum, stainless steel, and brass and all of this is none corrosive. This thing is going to remain in this condition for its lifetime.

Now these springs are rated at fourteen point five pounds under one inch of compression and twenty point four pounds with you know, fully compressed. Trust me, trust me, I doubt that your going to get close to cranking this thing anywhere near twenty pounds. And I mean you know, thirteen pounds a day, and you know this is enough springage for you.

And uh there’s two things about this particular device that are amazing now, um of course we have the stabilizer bar which you see on most units of course that’s mandatory, but that is not the amazing thing about this.

Two amazing things about this that they work in tandem with each other, and that is the Fulcrum here, this Fulcrum bar which has 1.9 inches of adjustment length which is a lot, and we also have this, and this is almost like between that this, this pivoting base which pivots um this adjustable pelvic ring pivots ninety degrees both upper and lower. Its incredible. That in conjunction with this Fulcrum is the crown jewel of this extender.

I saw a lot of people belly aching on Reddit about, uh oh well it’s a lot of money for this device and, yes it is, this device is expensive and its not meant for everybody. SO, there you have it, it might not be for you and that’s ok.

Uh, for the people it is for you guy are going to love it because this stretch that you can get from this extender is second to none in my opinion. And it, there is one thing that I tried here, I tried it straight down, like this…

And there was quite a bit of tension on here. It was probably at the end of my session. And I positioned the Fulcrum, its very simple, right now I have it loose and free flowing,  and just do like this and…, its done, its not moving anywhere.

Alright, so, I had it facing straight down. And I had, a bit of tension like I told you and, this device starts to go like this and, almost underneath me like a BTC stretch. It was really really good.

And um, its just one of those things that, you know, what other device does this? And, no other device does this. No other device has a Fulcrum that is, not, um this Fulcrum is just intrusive enough to give you the kind of um, bend that you need. This stretch, additional stretch that you need, without hurting you, and that is really important. Um da, one of the things that I really like about LG Hangers stuff is that its built with safety in mind.

Now the way that this ring is cut, its very easy to go in here, and what I like to use, is with this, just reaching back here to get it, is LG Hangers Chamber. Ok.

Now, can you use other chambers with this, absolutely. Absolutely, there’s a hook right here,  you have a hook on top of your chamber, your grand, your ready to go. Your ready to stretch.

Now, the reason I like this is because they made this, they made this chamber to my size. Also, the medical grade material that’s used on these sleeves is just incredible so everything feels really custom fit, and I like that, I like that, again, this chamber is not inexpensive. Its not for everybody. If your struggling to, to make ends meet, this is probably not the device you need. But if you want to have a premium device that’s going to last you a life time, from somebody whos going to give you incredible support, Marlons the guy over at LG Hanger. I know it sounds like an, ah, ah, paid avert, but it ain’t, ok. I’m telling you my experience. I’ve been this for years now. And I highly recommend him. I have bothered him at all hours. Uh, sorry Marlon. Uh, and he’s always helped me. He’s always gotten back to me, and what else can you say guys. Just what else can you say.

And now I’m going to give you a wee demonstration.

Ok guys I’m going to show you exactly how I use this, minus using my own penis because, it’s YouTube, you know, its twenty twenty four, you know how it goes here.

So the first thing I’ve done, is I’ve rolled up the sleeve and I’m ready to insert my penis, this’ll this’ll reflect myself, and I’ve put myself in, now I’m going to roll uh, the sleeve down on top of it.

Lets see if I can get it down. Now, now usually there is a rubber band here. And I don’t know why I’ve took mine off, I just did. So, there you go.

Anyways, so I’ve rolled the sleeve all the way down and now what I do next is I put on this piece of Velcro at the base of the sleeve, So I can get an absolute airtight situation going on.

Then what I do is I take the pump, I’m just gong to insert it right here. And I pump pump pump pump pump. As you can see I’ve used this a lot. And then, yeah. I’ve, I use this thing every day. So let me take this thing off. Come off, and right now what I’ve got is I have myself inside the chamber.

So what I do is I take this pelvic cushion and I simply just stretch it over.

So you have to imagine that this now is at the base. Just do a little of this. This is at the base base right here on my pelvic bone. OK, now all I do, I, to get into the extender, this, I make sure that the fulcrum is at the upper most position. And I go in through here. Very easy and, just like that. SO you can imagine that this, is right up against my pelvic bone. Now I’m ready to start the stretch.

Now what I do is I usually pull the Fulcrum back to the lowest position because I have these thumb screws at the lowest position. Now I was just screwing them upward. Because this has taken me so many takes, I’ve forgot to put them  down.

So I usually start down here, with no tension or very very little, ok so, I hook up and I’m ready to go.

So right here, that’s when I start working these thumb screws up. Ok, and as it goes up Your going to notice that your penis goes further across this fulcrum. So, ok you might be even, you even have some of the sleeve on the Fulcrum. Don’t worry about it. This is of course length dependent.

If your very long, your going to start out longer and the Fulcrum going to be more over your shaft and if your not as long its going to be over the sleeve. Just not a big deal. Ok you are gong to gain length and if your very good with this, meaning if your disciplined with it, you are going to have gains. Theres no doubt about it. This thing gives you a stretch like you wouldn’t even believe. So, Um, your gong to believe it once you try it. Your going to see what I mean. Because this Fulcrum situation is unbelievable. If you can see what kind of angle you can get. I occasionally will do an angle like this. If I want to get kind of a BTC kind of thing going, um I might pull the Fulcrum a bit forward. And that’s very easy to do. Also you can move the Fulcrum within the session. Which is brilliant. Ok, so, just, its very easy. That’s also why I like to put a wee bit of cocoanut oil on here. Just a wee bit. Ok, that way my skin slides over it nice an easy. But there have been many times, many session when I haven’t used it and its not a big deal. Locking the adjustable pelvic ring is just like super simple. Ok, very very simple, and these provide a lot of pressure, this does not move. So that’s pretty much it. If you have questions please put the questions down below. I look forward to hearing out the gains that you guys make this and your experience with using it. Please don’t hesitate to ask any questions in the comments section below. And I will be more than happy to answer them. Also, please do not forget, you have access to a discount, if you use the word IRISH in all caps, ok.

So best of luck and train safety.

Benz Extender with Adjustable Fulcrum Bar and Pivoting Pelvic Ring

The NEW Benz Extender

 -->CLICK HERE FOR THE BENZ EXTENDER<--

The above video shows the Benz Extender and how the adjustable Fulcrum Bar and Pelvic Pivot Head work. The springs generate over 20 pounds of tension and the Benz can be worn for extended times.

This is made of top quality materials right here in our own machine shop. We have limited quantities available so act fast and get your now.

VENTED Glans Cap Now Available

 

The NEW Vented Glans Cap

-->CLICK HERE FOR VENTED GLANS CAP<--

We've had some clients request a Vented Cap for hanging and have decided to add one to our ever growing product line of men's male enhancement items. 

It is a one size fits all and is super stretchy. 

The cap measurements are approximately 45mm (1.77") by 22mm (.866") in width 
.

The VENTED Glands cap is a great addition to the LG Hanger and can be used to help protect the glands while inside the chamber, making it the most comfortable hanging system on the market today.

 Similar to a support stocking, this protector cap exerts a slight pressure on the surface of the skin, reliably preventing side-effects such as swelling of the glans. The vents help with sweat issues and suction in the port area of your chamber.

The direct link to our Glans Caps:

EXTENDER Rods: How to Replace them

 REPLACING THE STANDARD SIZE RODS WITH THE XL RODS

CLICK BELOW TO WATCH THE TUTORIAL VIDEO

-->CLICK HERE TO PURCHASE EXTENDER<--

OK, to remove the standard length extender rods and replace them with the longer rods. 

This is what you’ll need to do. You need a 10 mm wrench or an adjustable crescent wrench. 

If you have one of the new extenders with the upgrade of the stable bar to prevent the twisting, then the first thing you need to do is just loosen these nuts and take them off. 

Disassemble these nuts off, take the stable bars off, remove this nuts and then you need to remove the spring bar which you can do by just doing this now. 

These thumb screws will have to come off. Also do both sides. You may have metal ones. We upgraded these to the brand here, so then the next thing you need to do, 

remove these also, or just loosen here on both sides. 

Righty tidy, lefty Lucy, and then just unscrew the threaded rod from the pelvic ring mounts. Take the nuts off and then reassemble using the long rods to screw the raw nuts onto each one and then put it back together the same way it was before. Back in the nuts backed off a little ways so that the rod fully threads down into the pivot mount and then take your ranch and snug that back up on both sides. So now we’re gonna go put everything back the way it was. Put both of these back on however long your penis is. You’re gonna make the adjustment and then like I said this this is goes back on like that. Both sides will go in here down there and then put the other thumbs on top reassemble the spring, the stable bar on top with the four nuts two on the bottom of this plate two on the top, snug it back up with your tender ranch or your adjustable crescent wrench and that’s it!

NEW Vented All Night Cap For ADANS-(All Day All Night System)

The NEW Vented All Night Cap  

Click on the movie below for a 360 view of the vented cap

-->CLICK HERE FOR ADANS WITH VENTED CAP<--

Introducing the New A.D.A.N.S (All Day All Night System!)

We here at LG Hanger have been listening to our clients requests for an All Night System and have invented a NEW Vented Cap!

These are new to the market and we have made a limited quantity of 35 to be marketed for feed back!

The Vented caps will be sold on our website until gone and we would appreciate feedback!

Both the Day and Vented Night cap will be included in the ADANS system linked at the bottom of this email.

The new Night Vented cap is wider than the Day use cap and is not only comfortable enough to wear all night, 

but prevents sweat build up, suction issues, and the potential for blisters while sleeping because the included sleeve will be doing the bulk of the work.

Chamber & System: Putting on and Removing

 How to Put on and Remove your Chamber

--->CLICK HERE FOR THE LGH WEIGHT HANGING SYSTEM<---

We’re gonna install our LG Hanger Chamber.

First thing your gonna wanna do is take your rubber sleeve and get it, stretch it, and roll it up over the mouth of the chamber to expose the mouth chamber.

So it’s a new sleeve, so it’s a little stiff

That’s how you do, so roll it up over your mouth of your chamber, so the chamber mouth is fully exposed.

Now we’re gonna install our chamber and I’m assuming everybody’s done their warm-up up, you know you got your glans protection wrap on, done some jelqing or are you heat lamp, or a warm shower.

 So your flaccid is fairly full as you can see here, there’s no skin wrinkles, um you can even say your slightly aroused maybe twenty, thirty percent, something like that. Ok now, we

showed you how to roll back the rubber of your chamber, now were gonna install the chamber, so

I use a Girth Band or section of sleeve. For demonstration purposes I’ll just use a section of sleeve cause I know not all you guys are buying Girth Bands, but, I recommend the Girth Band they’re a little bit better, but anyways,

So you’ve got your penis a little bit firm, you go ahead and insert your penis all the way, into the bottom of the chamber, see that. Then begin to roll the rubber sleeve back up over your penis, so see how I did that?

Now you got a little vacuum in there just because the sleeves tight on your skin, so roll that rubber back.

And you know I pretty much personalized my sleeve. I know how long I like it based on the length of my flaccid penis.

So there you are. Your sleeve is installed.

 I’m going to show you how to draw a vacuum out of your chamber.

So, take your… Plug it in, um mines a little off zero cause I dropped it but, imma show you a little trick, draw some vacuum out, about there, hold it for a few seconds,

1,2,3,4,5, release it, do it again.

Uh you see how my penis, glans is packing and filling the chamber? When I do that?

So imma release the pressure, imma do it a couple more times.

This is what’s called priming your chamber. Your getting your penis ready to hang the weight.

You know I’m a little over ten, based on my zeros not all the way to the bottom, but, so I’m about ten there, there you go, now I’m just going to release the pressure.

You can see the sleeve is tight. I’ve got a really good seal here, I can pull on that, its pretty difficult, hard I mean, and you can see.

Ok now here’s eight pounds of weight. I’m going to attach this to the end and then slowly lower it see.

See, there you go.

Alright, were going to remove the weight and remove the chamber now. You been hanging now for, whatever, uh, forty five minutes, and hour, whatever you know. So now, just take the weight and take it off the chamber.

Then, to remove the chamber, you just want to lose vacuum seal so, you find the end of your rubber, take a couple fingers, start pulling it down and there you go.

The LG Hanger System V. Other Vacuum Hangers

What's the difference between the LG Hanger Vacuum Based Weight Hanging System and other vacuum-based devices?"
The LG Hanger System is manufactured from a solid piece of optically clear acrylic
It is machined on a C.N.C. lathe and mill
The Chamber is sized, based on customer provided measurements
It's not injection molded from recycled plastics.
It's not made in China by slave labor, it's made in the United States.

There are several significant design differences that hugely effect the comfort and effectiveness.
Our chambers are ergonomically designed to conform to the shape of your penis.
The vacuum cups made in China are shaped like a bullet nose, and your glans is shaped more like a WW2 German helmet or mushroom.
Our chambers have a full radius at the bottom of the internal bore that allows for complete glans expansion. Bullet nosed caps don't.

 

LGH chambers are deeper and this is very important because you'll want the weight to pull from the entire shaft and not just the glans.
This if very important in helping to prevent blisters! Here's a rhetorical question... When you do hand stretches, do you pull from the glans or the shaft behind the glans. Easy answer, so why would you want to use a cup that pulls from the glans?

Our chambers incorporate an industrial grade pneumatic fitting that allows you to use a hand pump with an Hg vacuum gauge. This allows you to know exactly how much vacuum pressure you're extracting. Another important design feature that helps eliminate the potential blister. You have no way of knowing how much vacuum you're using with a cup. They use mouth, an enema bulb or a plastic siphon gizmo to draw an unknown amount of vacuum out, and typically it's too much.

All our chambers use a sturdy metal hook that's screwed into the top of the chamber, it's not a thin piece of wire. The last thing you want when you get up to heavier weight like 10 lbs. is for that thin wire to fail and have the weight drop onto your toes or foot!

Last of all we are the ONLY manufacturer that includes the BUNDLE hang option, for when you progress to more advanced PE exercise.

Weight Rings Measurement Guidelines

Suggest size for FLACCID girths

Hello PE Enthusiasts,

    Last year was a very productive year for LG Hanger! The design and development of our new 1 1/2 lb. weight ring has finally come to fruition. I'm pleased to say the long arduous process of manufacturing and testing is complete.

    We've listened and responded to requests to come up with a low traction / extended wear device that's user friendly and inexpensive enough for all men to enjoy and benefit from.

    While many men are interested in enhancing the size of their manhood, just as many are concerned about penile health and erection quality. Designing a device that could achieve both was of our main objective. With all the television ads that are addressing erectile dysfunction and Peyronie's disease, men are seeking solutions now more than ever.

    The pharmaceutical industry is at the forefront and wants men to believe that drugs are the solution to both problems.
We at LG Hanger endeavor to offer more of a holistic approach to problem solving these issues. Can a mild amount of traction placed upon the penis help to overcome ED and Peyronie's conditions? Many urologists are suggesting that it can. To buttress that observation, take a look at the various devices such as penis pumps , "extenders" and all-day stretcher devices that are currently being marketed with doctor endorsements. Many such devices are poorly made, expensive and not user friendly.
We read thousands of forum reviews, personal emails and field numerous phone calls from men who back up that observation.

    Switching gears to those who are more interested in male enhancement or penis enlargement. I'm not going to get into the variety of reasons for men's personal motivations to enlarge their penis. There are just too many to address and I'm not Dr. Phil. Suffice it to say most men don't want to be what is considered average, and I've never heard any man other than Howard Stern brag about being less than average. So how does the LGH 1.5 lb. weight ring compliment those who train for size? It provides enough traction to prevent your penis from retracting or as the penis enlargement community refers to as "turtling". It's a supplemental device to be worn after more intense penis enlargement training, that will prevent your penis from retracting while you recover.

    There are four sizes, all of which are 1 1/2 lbs. Each size is commensurate with our LGH Girth Bands. It is recommended that you use a Girth Band or a portion of silicon sleeve under the weight ring to provide grip and comfort.
You can however use a Tender tape wrap under the weight ring if desired. It's important to choose the appropriate size for correct fit. The ring is held together with two magnets and once installed will employ a small amount of compression along with the grip of the silicon Girth Band or sleeve to hold it in place. This will ensure good blood flow and prevent any circulatory compromise.

    Extensive testing has determined that a single ring can be worn up to three continuous hours, however most men need to relieve themselves approximately every other hour depending on fluid intake. Since the rings are easy to installed and remove, bathroom breaks are easily accomplished. For those who want to use a little more weight, two rings can be worn simultaneously too. Testing revealed that two rings can be worn for approximately 1.5 to 2 hours with no difficulty. With two rings however you can experience a little bit of edema in the frenulum area. If so, a moderately snug compression wrap can be used to eliminate that condition after sustained wear times.

    Choosing which size LGH weight ring that is appropriate for you depends on a few things. I personally recommend that a LGH Girth Band or a section of one of our silicon sleeves is worn underneath the weight ring. A couple reasons for that are the Girth Band or section of silicon sleeve will provide comfort and prevent any potential skin pinch. Secondly it will help provide grip. The LGH weight rings are designed to be held in place with only a minimal amount of compression so as to not compromise circulation. They are not like a compression clamp that you can tighten up. The two halves are held together with two small magnets rated at 9 lbs. of pull, this ensures that the two halves will snap together when installed. A small gap of 3/32" or 2.4 mm was removed from the center of the two halves in order to help provide a minimal amount of compression. If you decide you do not want to use a Girth Band or section of silicon sleeve and instead want to use a wrap that's fine. However, you will likely want to use one size smaller of a ring. The reason is because both our LGH Girth Bands and sleeves all have a 1/8" or 3mm wall thickness that takes up space inside the internal diameter of the weight ring.
Lastly, depending on the location along the shaft where one places the weight ring is important too. There aren't too many men who have uniform girth throughout the entire length of their penis. Most men, including myself have a smaller girth circumference below the glans than at mid shaft. So, if you intend on wearing two rings, one below glans and one mid shaft you will probably require two different sizes of ring.

CLICK HERE FOR 1.125" Weight Ring

CLICK HERE FOR 1.250" Weight Ring

CLICK HERE FOR 1.375" Weight Ring

CLICK HERE FOR 1.500" Weight Ring

VIDEO: Magnetic Weight Ring Penis Stretcher

This summary is not available. Please click here to view the post.

TROUBLESHOOT Vacuum Loss

First of all, let's recognize that when we start stretching our penis, it's going to start getting thinner, which means the silicon sleeve has to conform to the shape as it gets thinner. One of the main things that you can experience a vacuum leak is because you may have too big of a sleeve, which doesn't conform to your penis when you start stretching. So think of it like this, like a rubber band. Here's your penis, you start stretching and starts getting thinner, the sleeve is unable to conform to the thinner penis. So as a suggestion, I would recommend going to a smaller sleeve if you're experiencing that problem.

The girth band provides a mild amount of compression, which will in turn, help this portion of the penis, where the chamber's going to be fitted, to expand and stay more expanded, helps trap more blood, keep it fuller during the hang session. So this is an important thing to do, use a girth band.

Here's the hand pump that we use with our systems. Now here's what it is, you see the gauge here, I'm going to plug the hose and draw out some vacuum. See how the needle slowly starts to go down. Okay. No big deal, your hand pumps still good. Just do this. Plug your hose into your chamber, draw out a little more vacuum than you need. Wait till it goes to where you want it to be, I'm a say 10, and then just disconnect. That's it. It's still-

Use a longer portion of sleeve, if necessary. Now, this all is predicated on how long your flaccid penis is. We typically install three inches of sleeve on the chamber. However, once you install your chamber, your penis is going to hit the bottom here. If you have a little extra sleeve, it can fold over your girth band which will in turn, help ensure a better vacuum seal. So that even as you start getting to higher weights, you're not going to experience a slip or any vacuum loss.

As you're using your hand pump all the time, the hose could be getting loosened up on this little barbed end, and it could leak vacuum through this area. So what you do is you just pull the hose off and snip it off and re-install it. It's going to make for a nice tight seal.

You can see there's a couple little rubber O-rings on here. These little rubber O-rings can wear a little bit to where once it's plugged in, it could leak a little bit of vacuum. So I recommend doing the same as I showed you before snip the hose off, put a new little male fitting on and you're good to go again.

My personalized Routine for Weight Hanging

I'll outline the basics as it would be very difficult to provide what my PE training entailed during the four years I was working towards fulfilling my full PE potential. That's because I trained intuitively and was constantly changing the routine in order to break through plateaus.
This required incremental increases in the intensity, time and weight I used. 

Basics -
Warm up with moderate hand stretching while taking a warm / hot shower. This can be done with a heat lamp too.... 5 to 10 minutes.

Two hang sessions per day, one in the morning, and another in the afternoon or early evening. These sessions were 45 minutes up to a full hour. Followed by very aggressive hand stretches for 5 -10 minutes, pulling in a variety of directions.... straight out, up, down, and side to side. The intensity of these hand stretches should be as hard as you can tolerate. Train 3 days on, one day off, two days on, one day off. On off days' work on erection quality. This means achieving an erection and maintaining it for 15-20 minutes at 75% - 100% firmness, and doing 20-30 Kegels and holding the Kegel for 2-3 seconds before releasing it. This helps strengthen the pelvic floor muscle and promotes better erection quality and control of erection firmness.

In between hang sessions I would wear my ADS throughout the day as much as possible.
After my last hang session / hand stretches, I would do a 15–20-minute pump session.

As I progressed to heavier weight and hit a limit where I couldn't effectively use more weight (15 lbs.) I started to look for ways to increase the stress load without using more weight. This is when I started to incorporate the Fulcrum and Bundle. This was approximately around the two-year mark of my training.

By the third year I started to introduce clamping and added a few more pump sessions throughout the week.

I'm not doing any personal coaching, but if you're interested in that and have the means, I would recommend you contact Dr. Richard Howard. He can analyze your current routine and level of experience, and make adjustments as your progress. He may offer a different approach than myself. We don't necessarily agree on everything, but generally speaking penis enlargement has two basic components - stretching and expansion.

CLICK HERE--->To Purchase Clamps & Girth Bands

Edema-Swelling of the Glands

 Edema and Swelling in the Glans area

Edema is fluid retention.

Vacuum pressure exerted & isolated on the end of your penis can produce some fluid retention on the underside of your penis in the frenulum area.

It is not detrimental to weight hanging or pumping. Over time as your penis becomes more conditioned to the stress and work load it will diminish. 

Edema is easily displaced if after your hang session or pump session, you use some Tender tape to wrap the area. A snug compression wrap of the area for 15-20 minutes will get rid of it. Wrap snug, but not tight enough to inhibit circulation. 

Installing a Girth Band over the wrap is helpful too.

VIDEO TUTORIAL: Detaching & Cooling Down TOTAL MAN

HOW TO DETACH FROM YOUR LGH & FINAL COOL DOWN

CLICK BELOW FOR VIDEO

-->CLICK HERE FOR LGH SYSTEM<--

In this video, I'll be taking you through how to detach the LG Hanger. Yes, that's right. A pure video just to explain how to detach the LG Hanger because it honestly deserves its own video.

Now, as much as the LG Hanger may seem like a more tedious process to go through for a hanging experience, it is honestly one of the most effective and safest ways to hang, not to mention see results in the long term. I personally actually use the LG Hanger in every single one of my routines, so I'm definitely a true advocate for this penis enlargement device, especially for length. But, it has also honestly seen me through some girth gains as well.

So, detaching actually deserves it's own video all together and here's why. So again, even though it's a more tedious process, one, I'm a solid advocate and truly believe in the LG Hanger, but two, it makes for a safer and more effective experience. Now, why I say that guys is because you might be thinking, wow, that's really tedious if he's making a whole video on just detaching the thing. But, please believe me when I do say this, it is so worth it.

All right guys, detaching. Pretty much the opposite of what I went through with you, where the attaching and even progressive hanging, is we do want to accommodate for that fluctuation in pressure, which is now going to be released. All right, so if you're at your maximum weight and you haven't necessarily dropped down any weight, but you're done hanging or you've run out of time, then you really need to make sure that we're holding onto the chamber, keeping that pressure in there. No, I'm going to do is hold the chamber down, take the carabiner or the weight off. You don't necessarily need to drop weight because if you do need to detach now, this is the way to do it. All right, so all I'm going to do. You won't actually be able to see what I'm doing, but I can just talk you through it. All I'm doing is slowly releasing the pressure.

So, if I could have a pressure scale from 10 down to one, and one being I can literally just let him dangle there without actually holding onto the chamber. For instance, I'm going to be at ten, nine, eight, seven, slowly backing off that pressure, five, four, three, two, one. All right, so not too much fluctuation there, and the glans feel completely fine. All right, guys, so once your weight is actually off, time to detach the LG Hanger.

Now, the way that I've found that works pretty much every time, not only with releasing the pressure... I used to actually use the pump to release the pressure, however I actually found this a lot more comfortable and a lot more effective. All I'm going to do is actually get a bit of stretch happening with the sleeve. But, as long as you do it nice and close to the chamber. Now, what I'm doing is getting about three fingers underneath the chamber and all I'm going to do is roll toward the chamber. I'm going to pull one side all the way up, I'm going to pull the other side all the way up, and I'm just going to continue to actually push the slave up toward the top of the chamber. As I continually slide, you notice that I'm pretty free to come out. All I'm going to do is push down on one side of my glans, and I can nice and easily slip on out. Just take your time with this, don't force it, and you'll come out nice and smooth. Nice and easy, guys.

Now, the next thing is obviously cooling down for one, but two is obviously removing the tape. Now guys, as helpful as this is, one of my initial or first experiences with the tape was an absolute traumatic one. If you can imagine how much pressure has now been built up inside the glans and the shaft, especially where the tape is attached to the penis, which is a little bit on the shelf, but mostly on the tip of the glans. And you could only imagine how much the skin can now be sensitive because of all that pressure from your hang, or any of your routine to do with the LG Hanger.

So, what we need to be careful of is actually taking the tape off. I experienced this firsthand that because the skin is so sensitive, one of the times I took the tape off was the worst way possible. I literally just started slowly peeling it off and I thought that was the right way. Lo and behold, it actually told my skin. There was blood everywhere, so I'm recommending... I literally gave up tape altogether, except you will have no success or no progress with your LG Hanger or any vacuum-based device for that matter. So, the best way to get this tape off... Now, it's a bit of a combo of a cool down plus a fantastic way to get the tape off is just some warm water.

All right, now you can even put some soap with no nasties in it in the water. The soap is actually going to act to break down the adhesive on the tape from the inside, but even warm water is totally going to be fine, guys. So, all I'm going to do is pretty much pop him in nice, warm water, make sure it's not too hot, and I'm going to hold him there for about 30 seconds. Now, once you 30 seconds is up, all I'm going to do is pretty much just rub on the tape pretty much everywhere. So, the water's going to slowly make its way into the tissue and the material of the tape. Now, what I'm going to do is actually go for a little bit of a cool down. I'll actually finish up with a bit of a jelq, massaging all the tissues that have now been stretched and deformed and actually stressed.

So, we want to essentially just tell the penis everything's all right and we're just going to cool down by more or less massaging. All right, so it's like a jelq, except there's no way that I'm going to full intensity. So, this is really light, just massaging it out. And what this is also going to do is build up a little bit of pressure to help that adhesive breakdown and to actually come off the glans. So, I might even go for maybe 20 to 30 quick jelqs, chuck him back in for another maybe 30 seconds, get him out, same process again, rub the water in pretty much from top to bottom. Jelq it out a few more. Again, this jelq is going to continuously build the pressure up in the head, and actually help to get the actual adhesive to come off the glans. Now, I'm getting quite a bit of success there, so I'm going to try to get it off. I can feel it's really loose. It's hardly even sticking to my glans anymore.

It's just going to come off nice and easy. Again, just keeping everything really close. Now, if at any point, guys, it feels that it's starting to grab, as you can see here it's a little bit of grab. It feels like it's too much, simply get the water, go back in again, repeat the processes we just did. Otherwise, you can keep peeling it off. Go nice and slow all around. Now, even after that you can still finish off with a little bit more of a jelq, and you're good. I'd love to know if this video helped, guys. If it did, let me know in the comments. If it didn't, still let me know. If you have any questions, let me know in the comments, and I'll do my best to get back to you as soon as possible.

And if you have any other ways or methods to actually detach the LG Hanger, please leave a comment below as well. Because you never know how far your comment is going to go to be able to change somebody else's life and help someone else out as well. Plus you never know, with a question, you might even be able to help us answer someone else's question that they didn't even ask yet. So, get involved and we'll honestly all love you for it forever. I really hope you enjoyed the video, guys. I'll see you in the next one.

Jelq Roller-How its machined & Use

 The Jelq Roller-One of a kind

----> CLICK FOR LINK <----

When you purchase a LGH Jelq Roller you're not going to get something 

made of plastic and insulation foam rubber.

You'll be getting a device that has been ergonomically designed for rigidity and safety. 

A device that has been manufactured from the best materials money can buy. 

The Jelq Roller arms are manufactured on a 3 axis C.N.C. mill out of solid billet T-6061 aluminum. 

The roller cores are also aluminum and the roller shafts stainless steel. 

The rollers themselves are a medical grade silicon. Quality and effectiveness that is unsurpassed!

Check out the video below that shows the cutting of one of the Jelq Roller Arms.

Its just one of the many processes need to manufacture the finished product.

How its Made

Using the Jelq Roller

ARTICLE: JELQ ROLLER Replacing/Removing/Adjusting Rollers Pads

 Set Screwed installed

 tapped hole for the set screw

 Set screw and the 5/64th allen wrench

 Wrench and set screw prepped for install on the Jelq roller

 Insert set screw

 Insert Set screw and tighten

 Set screw lines up with the flat on roller shaft to keep it from turning

How the installed and tighten set screw should look

VIDEO REVIEW: LG Hanger Penis Enlargement System TOTAL MAN

---->CLICK HERE FOR LG HANGER SYSTEM<----

ENGLISH

Custom designed and crafted to your penis. 

World class, high quality materials, leaders in the field of vacuum penis hanging and penis enlargement. 

The highest likelihood of seeing the greatest results you've ever had. 

The LG Hanger. 

Okay, okay, before I get carried away too much, in this video, I'll be taking you through a full review of the LG Hanger vacuum-based penis hanger. I'd like to not only take you through my experience from, literally, start to finish, I'd also like to go over some pros, cons because I'd like to give you a full experience. I'm starting right at their website which is brilliantly designed and easy to navigate. Heaps of good information and easy to find the items and whatever you're looking for. The checkout was real simple. Obviously just enter in all your details and you're good to go. Now, upon contacting Marlin at LG Hanger, the response was instant, which I believe is a great sign. If customer service is great before you buy it, then I feel like you know that you'll be looked after once you do buy the product and if you ever need help thereon after. Now, because it is custom-made, literally, to your penis, and with the finest materials that obviously have to be purchased on their end, the expected manufacturing time that was emailed to me was seven to ten days, and time for postage to Australia from the U.S. was supposedly seven to fourteen days, so I was willing to wait a while. However, my product literally got to my post office within 10 days, which was awesome. Now if you're like me when you're ordering something and you want it the next day, not to worry because it is well worth the wait. And you know like the saying, good things come to those who wait. The e-mails were very prompt along with the receipt, tracking number, and all the check-ups. It was just a really smooth transaction. All I had to do was send them my measurements after the purchase and the next thing you know, ten days later, the product arrived. Finally, a LG Hanger.

-Dude, you got a new package.

-I know, man, I'm so excited.

-What is it?

- It's a vacuum penis hanger. You know, to hang weights off your penis to make some awesome length gain.

-  I'm sorry, what, wait.

- Was I supposed to keep that to myself? All righty, guys, the moment you've been waiting for, the, probably not the moment you've been waiting for but the unboxing of the LG Hanger. More or less a parcel, unparceling maybe. Let's go ahead and cut this puppy open. Oh there's another package. Oh there's another package. What is this, pass the parcel? At least we know that the product isn't gonna get damaged because this is actually like a bubble wrap packaging. So that is really good to know, that there's effort into the packaging. I think that's really when you know that there's a quality product inside.

 Oh, and there it is, woo-hoo. This is exciting. Wow, this is a big unit. I actually wasn't expecting it to be this big. It's got that brand new, fresh smell. So it literally comes like a package. I'm pretty sure there's a Velcro strap, kind of like a double-sided clip system that you put your whites onto. I've got some kind of firm tape, some brand new elastic bandage, the actual hanger chamber itself with some tubing so you can unclip or clip, what looks like about five to six inches of a silicon sleeve, two rubber bands. So I'm pretty sure I've got the package B. It's actually without one of the trigger handle pump. Now, the only reason I did this was because I actually have my own trigger handle pump with a gauge and all that actually hooks up to my LA vacuum pressure penis pump. And what it also comes with, which is real handy, is obviously an instruction manual. I actually got LG Hanger hanging system package B. 

Now for something that is absolutely custom, this thing is impeccable. It is honestly a masterpiece of design, ingenuity, creativity. It's not actually too heavy either. So what it comes with is a ready silicon sleeve attached, so obviously that's how you attach it with the rubber band. And it's pretty good, it comes with the vacuum hose. It can actually unclip and the vacuum pressure will maintain inside because there's a one way valve that springs into action so you don't lose any pressure and if you wanted to either take it off or even pump some more pressure in, you simply clip it in and off you go. Now obviously you do have this double sided clip system that you can probably use as like a clip and then clip it on your weights. Now depending on however you would hang your weights, what I wanna cover in another video is actually what I use. I use just a U shape kind of anchor, like this. Fully stainless steal, probably about four dollars Australian and a simple carabiner, also stainless steel, probably another few dollars. Now the reason why I like this, and especially with possibly a hanger like this, is because of how low line it is, right. So I actually hang my plate just here. It doesn't take up much distance at all. So even if you wanted to sit, it'd be really good. So to really quickly go over the pros and cons to the LG Hanger itself, and even in comparison to a normal compression hanger. Let's start with the cons, alright, gonna start with the negatives. It's a bit pricey, I must say, but it's custom made and the quality of this material, honestly, it's gonna be lifelong I reckon. It's so solid you can just about kill someone with it. Not that you would guys, all I'm saying is you get what you pay for. Now it may take some time getting used to, trying to figure it out and get the right fit, but once you do, it's good. 

There is a risk of getting blisters if you use it for too long without proper conditioning and you know you learn how to listen to your penis properly, so there is that risk. Another con is you may be limited to go to about 20 pounds, which is technically way more than enough and more than you should need because you should only be starting with one pound and slowly and incrementally be working your way up, conditioning the glands, skin, and other tissues, that obviously need that time. For instance, compression hanger, now in terms of the weight, just to give you an idea, comparing it to a compression hanger, there's literally almost no limit. Another con is it just may take a little tiny bit longer to put on then a compression hanger, but really no biggie. But comparing it to the amount of time you'll be saving because you won't need to take it off for up to an hour, you will definitely be saving a lot of time. So technically it's actually quickly. 

Now for the pros. The chamber is custom made to your penis. What other product does that guys? The quality is seriously high. Both of these pros is really where the price comes in. However it's so comfortable once you work out what feels right for you, the right fitting, the right pressure, the right length of sleeve, you're good to go. It's never, ever, ever cutting off any circulation, only allowing new, fresh flow of blood throughout the entire penis for the whole session. That is good news. It's stretching the entire penis from the glands all the away to the base and not just where a, let's say, a compression hanger would grab onto just behind the glands. Although one con was limited weight at 20 pounds, honestly it should be way more than enough for most hangers, especially if you're up to intermediate and even advanced. If you do it right and you don't allow the ligaments and particular tissues to tighten up and get too strong, that is way more than enough weight. 

Another pro is you can honestly hang for three times as longer then a compression hanger. It said in the instructions for the LG Hanger that you should probably go up to an hour, or you're allowed to go up to an hour, and you should probably check in, which is a good idea, however with a compression hanger, you literally have to take off the compression hanger, like the bib hanger or the male hanger, every 20 minutes just to restore that blood flow so there is that risk of cutting off blood circulation and it's also turning what would be once two hours of hanging into literally three hours. So a pro is you're saving actually a lot of time. 

And another pro is just great customer service and support. Now another thing I wanna mention is because of it's safety, in terms of not cutting off blood circulation or risking permanent damage, I don't even set my countdown timer like I would with a compression hanger for 20 minutes anymore. I just set my timer that goes up and will hang for as long as I need to and then just record the drop in weights to the time in my load. Also I've tried hanging with an ADS stretcher before and the chambers are just way too small. Even though it's nice and comfy when you're wearing it under clothes throughout the entire day, but they're not designed for a lot of weight like the LG Hanger is. For instance, I've tried hanging 11 pounds with an ADS like the Phallosan Forte, or even a stretcher I found off eBay which was only fifty bucks. The head of it was painful so I couldn't. Now with the LG Hanger, no problem. So would I recommend the LG Hanger? 110%. It has honestly been the comfiest vacuum pressure hanger or any device that I've actually used to hang that amount of weight that is obviously necessary to see those results that we're all wishing for if you're in the penis enlargement game. Now when it comes to the penis, your penis, my penis, we've all got just one. So I'm telling you right now, you get what you pay for and the more quality, even the more custom fit, just like the LG Hanger, the better your experience, comfort, results, but also safety. Safety is gonna be a huge one in this guys. The last thing we want is to be counter intuitive or productive and actually go backwards, cause injuries and possibly even permanent damage, alright. So yes, the LG Hanger, as maybe a con is a little bit expensive, but for the sake of the custom fit, the experience, the quality is just insane. If you've used the LG Hanger, let me know in the comments. I'd love to know about your experience. And if you have any questions about the LG Hanger or any videos that you would like me to include in the series to come, please leave them in the comments as well. I'd love to help and I'd love to do those videos for you as well. Also make sure to go across to LG Hanger's web